Category Archives: gt30

Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings

April 19, 2023gt30055m, feed, fittings, gt30, gt3037, hoses, return, turbo, universaladmin

We know our products. Always the correct part. Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. GT2052V Turbocharger for Nissan Patrol 3.0L D ZD30DDTI/229 ZD30ETi 1999 – 2005. TURBO CORE CHRA CARTRIDGE GT2056V FOR NAVARA PATHFINDER 2.5 DI YD25 14411EC00B. Turbocharger for Nissan Navara 2.5 133HP 98KW 14411-VK500 VN3 YD25 Turbine. Turbo Charger Fit for Renault Kangoo Scenic Dacia Duster 1.5 dCi 110 BHP, 81 kW. Turbo 54359880015 for Vauxhall Opel Corsa D 1.3 CDTI Z13DTH turbocharger. Turbo Turbocharger for Audi A4 2.0T B7 BUL BWE BWT K03 2005 2007 2008 2009. T3 GT3582 GT35 A/R 0. 63 Turbine Turbo Turbocharger turbocompressor up to 600HP. Turbo fit for Mitsubishi Pajero L200 Express 2.5L 4D56 TD04-09B Oil Turbocharger. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped to United Kingdom.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: 27SJPT
Manufacturer Warranty: 2 Years
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30, GT3037, GT3076, Turbo Turbocharger Fuel Oil line Kit, TURBO KIT
Thrust bearing: 270 Degrees
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Type: Turbocharger
Universal Fitment: Yes
Feature: ESCP
EAN: 6941324413401

Incoming search terms:

bmw gt30 turbo

GT30 GT3037 UNIVERSAL turbo kit with oil Return Feed hoses fittings T3 Flange

March 27, 2023gt30feed, fittings, flange, gt30, gt3037, hoses, return, turbo, universaladmin

Easy Return Quick, Simple. Guaranteed Fitment Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, the updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger Turbo Cartridge For Dacia Logan 1.5 dCi K9K-700 2000 – 54359880000. Coilovers For VW Golf MK1 Scirocco MK1 MK2 Jetta MK1 Spring Shock Lowering Kit. T70 Turbocharger T3 V-band Flange 0.70 A/R + Oil Drain Return FEED for 1.8-3.0L. Bielas Conrod Connecting Rods ARP 2000 for Opel Vauxhall 1.6 Turbo Z16LET Z16LEL. Connecting Rod for Fiat 2.0 coupe 5 cyl 20V Turbo Conrod Con Rod Bielle ARP MAK. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “exquisitemotorparts” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: EPZNXV
Manufacturer Warranty: 2 Years
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30, GT3037, GT3076, Turbo Turbocharger Fuel Oil line Kit, TURBO KIT
Thrust bearing: 270 Degrees
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Type: Turbocharger
Universal Fitment: Yes
Feature: ESCP
EAN: 6941324413395

GT30 GT3037 UNIVERSAL application turbo kit with oil hoses fittings T3 Flange

March 19, 2023gt30application, fittings, flange, gt30, gt3037, hoses, turbo, universaladmin

GT30 GT3037 UNIVERSAL application turbo kit with oil hoses fittings T3 Flange. We know our products. Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. Turbo Turbolader for Mitsubishi Challenger Engine 4M40 1996- 2.8 L 4M40. Turbo T25 T28 GT25 GT28 GT2871 GT2860 universal A/R. 64 Turbolader w/ gaskets. Turbo TurboCharger for Mitsubishi Pajero L200 L300 L400 Delica TD04-11G Turbine. TURBOCHARGER for NISSAN NAVARA D40 2.5 DCI DIESEL 769708-1 14411EC00B 2008-10. Turbo Cartridge Chra for Nissan Qashqai Renault Grand Scenic 1.5DCI 54399700030. CHRA Turbo Cartridge For VW Scirocco 1.4 TSI 118KW 160HP CAVD K03-099 K03-142. Turbocharger for Vauxhall Astra G CDTI 1.7 Y17DT 80PS 59kw 2003 2004 4917306500. Turbo Turbocharger for Isuzu Trooper Opel 4J2TC 4JB1T SUV VI95 RHB5 8970385180. Turbo Cartridge Core For Vauxhall Alfa Fiat Lancia 1.3CDTI 90HP 66KW 54359880015. Turbo for Skoda Octavia 2.0TDI 8P/PA 724930 100Kw 136HP BKD AZV with manifold. K03-029 Turbo for Audi A4 A6 VW PASSAT 1.8T Turbocharger 53039880029 w/ gasket. GT1549S CHRA Turbo Cartridge 738123 717348 for Renault Volvo 1.9 L F9Q. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “performancewarehouses” and is located in this country: GB. This item can be shipped to United Kingdom.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: 2UIP7S
Manufacturer Warranty: 2 Years
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30, GT3037, GT3076, Turbo Turbocharger Fuel Oil line Kit, TURBO KIT
Thrust bearing: 270 Degrees
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Type: Turbocharger
Universal Fitment: Yes
Feature: ESCP
EAN: 6941324413401

Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings

February 11, 2023gt30055m, feed, fittings, gt30, gt3037, hoses, return, turbo, universaladmin

We know our products. Always the correct part. Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Cartridge Chra BV43 53039700145 For Hyundai Starex 2.5 L 125Kw D4CB 16V. K03 TURBO CARTRIDGE FOR AUDI A4 2.0 TFSI B7 BWE BUL 2005 – 2008 06D145701H. Turbo Turbocharger for BMW 530d E60 E61 218BHP 2993 ccm Turbolader. Turbo for Renault Trafic Laguna Vauxhall Vivaro Nissan Primastar 1.9L F9Q. RHB31 VZ21 Turbo Turbocharger for Small Engine 60-120HP Rhino Motorcycle ATV UTV. Turbocharger Cartridge Core KP35 73501343 For Fiat Lancia Opel Isuzu 1.3 CDTI. Turbocharger FOR Opel Movano A 2.5dCi G9UK03 53039700055 4432306 exhaust Turbo. 5 TURBO TURBOCHARGER COMPRESSOR 300+HP. Turbocharger for Renault Clio 1.5 dCi Nissan Qashqai 1.5L 78KW Euro-4 Turbine. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: N1DGU0
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
Feature: ESCP
EAN: 6941324413401

GT30 GT3076 GT3037 Universal Turbocharger Kit With Oil Hoses Fittings T3 Flange

December 1, 2022gt30fittings, flange, gt30, gt3037, gt3076, hoses, turbocharger, universaladmin

We know our products. Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. 1x Turbocharger Turbo Chra Core Cartridge fit CITROEN PEUGEOT 1.6 HDI 90BHP new. Turbocharger for Peugeot 207 3008 1.6 THP EP6DT 150BHP Turbo W/ Electrionic. Turbochager Turbolader Fits for Golf V Polo V Touran 1.4 TSI 140PS 180PS BLG BWK. IGNITION COIL PACK For VAUXHALL ZAFIRA B 1.6 1.8 ASTRA H CASSETTE TYPE 10458316. GT2556V Turbocharger for BMW E39 E38 3.0D 184hp 135kw / 193HP 142kw M57 D30. RHF5 Turbo Turbocharger for Isuzu Trooper 3.0 4JX1TC 157HP Turbolader 8972503642. Turbo Turbocharger for Ford Transit VI MK6 2.2 TDCi 81kw 109ps/ 110ps 2006. GTA2056VK Turbo for Mercedes M-Class W164 W203 W211 140 kw 190 HP 757608 765155. Turbocharger for Hyundai Getz 2006 2007 2004 1.5L D3EA TD025 2823127500 Turbo. H Schaft 4340 Connecting Rod Pleuel for VW Jetta, For VW New Beetle 2001-present. Every message will be replied within 12 hours on 7×24 hours. 7×24 hours, always here for you. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “racingrepalcementparts” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: LYAH9P
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
EAN: 6941324413418

Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings

November 19, 2022gt30055m, feed, fittings, gt30, gt3037, hoses, return, turbo, universaladmin

We know our products. Always the correct part. Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Manifold Kit GT35 GT3582R T3 a/r. Turbo Cartridge GT1549S for Renault Primastar Scenic Trafic 1.9 dCi 703245-1. Turbo chra fit Ford Fiesta Fusion 1.4 TDCI 68HP DV4TD KP35 cartridge 54359700009. T3/T4 T04E Turbo Universal T3 Flange 5 bolts exhaust outlet flange turbocharger. Coilover for VW Golf MK 5 V Jetta MK5 1.9TDI 1.6FSI 1.4FSI Lowering Shock Struts. Turbo Cartridge Core for Jaguar XF Sportbrake CC9 3.0 D 202 KW 275 HP LR029915. NEW Turbo Turbocharger FOR Sorento 2.5 CRDI D4CB 140HP 103kw 2002 TURBOLADER. Turbo Cartridge for Land Rover Discovery 139HP 102KW 1999 -2004 452239-6. Turbocharger for Mini Cooper S R55 R56 R57 175HP 128KW EP6DTS N14 06- K03 turbo. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: 6XAFLQ
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
EAN: 6941324413401

GT30 GT3076 GT3037 Universal Turbocharger Kit With Oil Hoses Fittings T3 Flange

October 3, 2022gt30fittings, flange, gt30, gt3037, gt3076, hoses, turbocharger, universaladmin

We know our products. Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. Turbo Chra For Seat LeonAltea Octavia Fabia Superb TDI 105HP 1.9D GGT16V 751851. TURBOCHARGER For Seat Ibiza Toledo MK2 1.9 TDI 160PS 150HP 038253014E. T70 Turbo Turbocharger T3 Flange 0.7 A/R Turbine Oil Drain Return Feed Hose Kit. Turbo for Fiat Ducato Iveco Daily Opel Movano Vivaro Renault Master 2.8L turbine. Turbo Cartridge Core Chra for Nissan Interstar 2.5 dCi ; G9U;100/114 hp 93161963. Turbo Chra Core For Nissan Navara 2.5 DI MD22 133HP 98KW VN3 VB420058 14411VK500. 4pcs Connecting Rods for Toyota Starlet GT 1.3 Turbo 4E-FE/4EFTE Conrods 118mm. Turbo Cartridge for Toyota 2KD-FTV Hilux Hiace Innova Diesel 2.5L d4d brand new. Turbo + manifold for Audi A3 Seat Toledo VW Caddy Jetta 1.9 TDI BJB BKC BXE 77KW. Every message will be replied within 12 hours on 7×24 hours. 7×24 hours, always here for you. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “racingrepalcementparts” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: JBIW13
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
EAN: 6941324413418

GT30 GT3076 UNIVERSAL turbo charger kit with oil hoses fittings T3 Flange

September 8, 2022gt30charger, fittings, flange, gt30, gt3076, hoses, turbo, universaladmin

We know our products. Always the correct part. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Other items you might also like. Turbo for AUDI A6 2.7T QUATTRO Turbocharger 2.7L P AJK 1999 – 2002 53049700026. Turbo Cartridge Chra for Hyundai iLOAD BOX 2.5 CRDi 2008- BV43-0127 53039880145. Turbocharger Cartridge chra For Fiat Croma JTD, Stilo JTD with Z19DT 55205474. Rods Rod for Toyota Starlet GT Turbo 4EFTE 1.3L Conrods Con Connecting Rod cac. GT2052V TurboCharger for Nissan Patrol DI Mistral Terrano 3.0L ZD30DDTI 125KW. TURBOCHARGER FOR PEUGEOT 307 407 GT1544V TURBO 1.6 HDI 110/115PS + GASKETS. The message response might be delayed on Weekend, but we promise a response within 12 hours. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “vehiclepartsaccessories” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: JQBZIX
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
Warranty: 2 Year
EAN: 6941324413432

GT30 GT3076 GT3037 Universal Turbocharger Kit With Oil Hoses Fittings T3 Flange

August 22, 2022gt30fittings, flange, gt30, gt3037, gt3076, hoses, turbocharger, universaladmin

We know our products. Always the correct part. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. HT18 TurboCharger fit for NISSAN Civilian Bus W40 W41 4.2L D TD42T 1441151N00. Turbocharger CHRA Cartridge Cartridge for Rover for MG ZT 1.8 Turbo 1.8L P NEW. Turbo Cartridge Chra Core For Skoda Octavia II 105HP 77KW 1.9TDI BJB 038253016N. Turbo Turbolader for Mitsubishi Pajero Shogun 2.8 L 4M40 TF035HM-12T-4. Every message will be replied within 12 hours on 7×24 hours. 7×24 hours, always here for you. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “racingrepalcementparts” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: JFYWZ3
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
Warranty: 2 Year
EAN: 6941324413418

GT30 GT3037 UNIVERSAL turbo kit with oil Return Feed hoses fittings T3 Flange

August 21, 2022gt30feed, fittings, flange, gt30, gt3037, hoses, return, turbo, universaladmin

Easy Return Quick, Simple. Guaranteed Fitment Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, the updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Cartridge CHRA For Audi A4 2.0 TFSI(B7) BUL 2005 – 2008 K03 06D145701H. T25 T28 GT25 GT28 GT2871 GT2860 Upgraded Turbo Turbocharger Universal. Turbocharger Cartridge for Citroen Jumper /Relay 100HP 74KW 2.2HDI 4HV PSA 2006. K03 Turbo for VW 1.4 TSI Polo Golf MK5 Touran 53039880459 03C145701GV. Turbo FOR Opel Vauxhall Astra H Combo C 1.7 CDTI 97300092 4913106007 74kw 2003. Turbo charger fit for Nissan Qashqai Modus 76kw 78KW 1.5DCI K9K 54399700030. Turbocharger for Peugeot 807 2.2 HDi Citroen C 8 2.2 HDI 94 KW 128bhp. TURBO CORE CHRA CARTRIDGE for AUDI VW SEAT 1.9 TDI ASV / AHF 66-81KW 713672. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “exquisitemotorparts” and is located in this country: GB. This item can be shipped worldwide.

Bearing: Wet Float (Journal bearing)
Brand: BFO
Classic Part: Yes
Compressor A/R: 0.6 A,R
Cooling Type: Water + Oil cooled
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: Standard 4-Bolt
Features: Individual
Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
Horse Power: Capable of Boosting Horse Power up to 500BHP
Items Included: Hoses, T-Bolts
Manufacturer Part Number: GUOI03
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
Oil lines: Oil Drain Return + Oil FEED Line Kit
OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
Turbine Housing: 0.82 A,R
Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
Turbo Wastegate: External Wastegate
Type: Turbocharger
Universal Fitment: Yes
Warranty: 2 Year
EAN: 6941324413401

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30