Tag Archives: manifold

T04E-Turbocharger-TD42-Manifold-Fuel-Line-Kit-For-Nissan-Patrol-Safari-Y60-01-oce

T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60

T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60

T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
We know our products. Always the correct part. Turbo Charger&Oil Line & Manifold Kit For Nissan Patrol Safari Y60 TD42 Oil Cold. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. 63 A/R Stage III T04E T3/T4 Turbocharger+Oil Line+Manifold for Nissan TD42. This item fits: Universal Application. For 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP Maximum 18PSI (1.2Bar). Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooled Wastegate: External Wastegate. Compressor Trim: 48.1 A/R: 0.5 Inducer: 52.7 Exducer: 76 ———————- Turbine: Trim: 74.2 A/R: 0.63 Inducer: 64.8 Exducer: 55.8. Material: Cast Iron Mounted type: Top mounted / High mounted Turbo Flange: T3 Wastegate size: 38mm. You can plate it off if intending to use internally wastegated turbo (the blank plate is included). Package Includes: 1 x Turbocharger Kit 1 x Braided Turbo Oil Feed Line 1 x Braided Turbo Oil Return Line 1 x Manifold (You will get exactly as shown in the picture above). High Quality Material, Cast Housing with Durable Steel -Boost Engine Horsepower Significantly -Increase Engine Power and Torque Outpout; -Maintain Combustion Chamber Pressure and Fuel/Air Load -Contructed with High Quality Material -Built for Durability and Strength. 100% BALANCING TEST, This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. All of the materials we use are the best materials, and we believe that only the best materials will guarantee the life of the turbo. Turbine Wheel: the special K418 alloy to achieve stability under high temperatures up to 900 degrees Celsius, and never use K13 Inconel alloy. Turbine housing :Ductile iron QT450-10 can withstand temperatures up to 700 degrees Celsius Aluminum blades :Precision machining forging. Condition: 100% Brand New. Bearing Type: Journal Bearing. Accessories: You will get exactly as shown in the picture above. Professional Installation is Highly Recommended, Instruction is NOT Included. Additional parts will be needed for a complete installation. Please consult professional turbo installer for details. Does NOT have a internal wastegate so you must have a external wastegate on your manifold. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger Core Chra for Fiat Doblo Grande Punto Linea Multijet 54359880015. Turbo Chra for VW Touran Golf Caddy Jetta Passat B6 105HP GT1646V 54399880011. Turbocharger Chra Core Cartridge for MITSUBISHI GT3000 Stealth 235 KW. Turbo for Smart MCC Cabrio City Coupe Fortwo 450 0,8 CDI 799ccm Turbolader. KB4T Turbocharger for Mitsubishi L200 07-09 2.5 DID 4D56 VT16 VAD20022 turbo. Coilovers Suspension Kits Shocks for Nissan Infiniti G35 350 Z Roadster Z33 AMI. GT2052S For Land-Rover Discovery II 2.5 TDI/TD5 90KW Turbocharger cartridge chra. Turbo for ISUZU Holden Rodeo D-Max 3.0L 4JH1T 130HP RHF5 type w/ gasket. Turbo for Toyota Hilux Innova Hiace. 2KD-FTV 2.5 D4D CT9 CT16 oil Turbocharger. T3 T4 T3T4 T04E V-band Turbo Charger 0.63 AR Oil Drain Return FEED Line Kit. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “eternalautomall” and is located in this country: GB. This item can be shipped worldwide.
  • shipping time to UK notice: 2-4 b.d. from UK
  • Balance tested?: YES, twice balanced turbo
  • Brand: BFO
  • Compressor: Trim: 48.1, A/R: 0.5, Inducer: 52.7, Exducer: 76
  • Cooled type: Oil cooled
  • Important Notice: Package Included: Just like the picture, Professional installation required
  • Intended Use: Modification/ Enhancement
  • Manufacturer Part Number: 43FS89
  • Note: No Instruction Included
  • Notice: NOT Ship to UK zip codes with BT letters also any other islands, It’s aftermarket replcement part
  • Other Part Number: This item fits: Universal Application. 
  • Reference OE/OEM Number: T3 turbo t4 turbo t04e turbo tO4e turbo, Perfect for all 4 or 6 Cylinder,, for 1.5L to 2.5L any 4/6 cylinder, engine up to 400+ HP, Maximum 18PSI (1.2Bar)
  • Turbine: Trim: 74.2, A/R: 0.63, Inducer: 64.8, Exducer: 55.8
  • Type: Turbocharger turbo
  • Warranty: 2 Year
  • Wastegate: External Wastegate

T04E Turbocharger TD42 Manifold Fuel Line Kit For Nissan Patrol Safari Y60
T3-T4-Turbo-Charger-Oil-Line-Manifold-Kit-For-Nissan-TD42-Patrol-Safari-Y60-01-zu

T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60

T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60

T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
Easy Return Quick, Simple. Guaranteed Fitment Always the correct part. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. 63 A/R Stage III T04E T3/T4 Turbocharger+Oil Line+Manifold for Nissan TD42. This item fits: Universal Application. For 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP Maximum 18PSI (1.2Bar). Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooled Wastegate: External Wastegate. Compressor Trim: 48.1 A/R: 0.5 Inducer: 52.7 Exducer: 76 ———————- Turbine: Trim: 74.2 A/R: 0.63 Inducer: 64.8 Exducer: 55.8. Material: Cast Iron Mounted type: Top mounted / High mounted Turbo Flange: T3 Wastegate size: 38mm. You can plate it off if intending to use internally wastegated turbo (the blank plate is included). Package Includes: 1 x Turbocharger Kit 1 x Braided Turbo Oil Feed Line 1 x Braided Turbo Oil Return Line 1 x Manifold (You will get exactly as shown in the picture above). High Quality Material, Cast Housing with Durable Steel -Boost Engine Horsepower Significantly -Increase Engine Power and Torque Outpout; -Maintain Combustion Chamber Pressure and Fuel/Air Load -Contructed with High Quality Material -Built for Durability and Strength. 100% BALANCING TEST, This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. All of the materials we use are the best materials, and we believe that only the best materials will guarantee the life of the turbo. Turbine Wheel: the special K418 alloy to achieve stability under high temperatures up to 900 degrees Celsius, and never use K13 Inconel alloy. Turbine housing :Ductile iron QT450-10 can withstand temperatures up to 700 degrees Celsius Aluminum blades :Precision machining forging. Condition: 100% Brand New. Bearing Type: Journal Bearing. Accessories: You will get exactly as shown in the picture above. Professional Installation is Highly Recommended, Instruction is NOT Included. Additional parts will be needed for a complete installation. Please consult professional turbo installer for details. Does NOT have a internal wastegate so you must have a external wastegate on your manifold. Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, he updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE. 2003- for Alfa Romeo 147 156 1.9 JTD 46786078 Turbocharger CHRA CORE 716665. Turbocharger for Nissan Qashqai 1.5dCi 81kw 110hp Turbine 54399980030 New. VF52 VC440028 Turbo for Subaru Impreza & Blow Off Valve 320HP 14411AA800. GT3037R GT3076R Upgrad Billet Turbo anti-surge housing up to 690hp for 2.0L-3.0L. Exhaust turbocharger for Mitsubishi Shogun Pajero 2.5 L 4D56Q TD04 Oil Cooling. Turbo CHRA Cartridge for Toyota Landcruiser TD (KZJ90,95) 3.0L 1KZ-TE 1720167010. Turbocharger Cartridge For Dodge Sprinter 2500 /3500 156hp 115kw 709837-5 new. Turbo Chra Cartridge For Bmw 520 D (e60/e61/e60n/e61n) 2005-07 120/163 762965-4. Turbocharger for Subaru Impreza WRX 2L TD04L 13T Turbo Models 2004 2005. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “driveyoucrazyparts” and is located in this country: GB. This item can be shipped worldwide.
  • shipping time to UK notice: 2-4 b.d. from UK
  • Balance tested?: YES, twice balanced turbo
  • Brand: BFO
  • Compressor: Trim: 48.1, A/R: 0.5, Inducer: 52.7, Exducer: 76
  • Cooled type: Oil cooled
  • Important Notice: Package Included: Just like the picture, Professional installation required
  • Intended Use: Modification/ Enhancement
  • Manufacturer Part Number: JNMS0H
  • Note: No Instruction Included
  • Notice: NOT Ship to UK zip codes with BT letters also any other islands, It’s aftermarket replcement part
  • Other Part Number: This item fits: Universal Application. 
  • Reference OE/OEM Number: T3 turbo t4 turbo t04e turbo tO4e turbo, Perfect for all 4 or 6 Cylinder,, for 1.5L to 2.5L any 4/6 cylinder, engine up to 400+ HP, Maximum 18PSI (1.2Bar)
  • Turbine: Trim: 74.2, A/R: 0.63, Inducer: 64.8, Exducer: 55.8
  • Type: Turbocharger turbo
  • Warranty: 2 Year
  • Wastegate: External Wastegate

T3 T4 Turbo Charger Oil Line Manifold Kit For Nissan TD42 Patrol Safari Y60
Exhaust-TURBO-MANIFOLD-TOP-BMW-E34-M50-M52-M54-custom-k64performance-01-tlag

Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance

Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance

Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
K64 bmw performance & tuning parts. Invoice details & schiping POLAND k64 Kamil Szczyrbowski ul. Kuznicka 20, 47-440 Ciechowice. NIP: (EU) PL 6391868058. All orders We are shiping from EU / Poland. For countries outside the. Our specialization is BMW TURBO PERFORMANCE, Turbo Rebuild, TurboKITs, Custom Manifolds… Drift / Drag Racing Spec Tuning. STAINLESS STEEL simply HIGHFLOW 1000HP custom TURBO MANIFOLD. M50 m52 M54 engine. Flange / T3 FOR possitions GT30 GT35. Flange / T4 Borgwarner (only singlescrool), T66, T76 Godzilla. Exhausting to the wastegate valve / 48mm. We have a lot of orders for exhaust manifold at this moment. We apologize for the delay. High quality product for the most demanding user. High-quality k64 performance factory. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “k64performance” and is located in this country: PL. This item can be shipped to all countries in Europe.
  • Features: Individual
  • Unit Type: kg
  • Reference OE/OEM Number: 1
  • Country/Region of Manufacture: Poland
  • Brand: k64
  • Type: Upgrade Kit

Exhaust TURBO MANIFOLD TOP BMW E34 M50 M52 M54 custom k64performance
T04E-Turbo-Turbocharger-Manifold-Kit-Oil-Lines-For-Nissan-Patrol-Y60-Y61-new-01-wm

T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new

T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new

T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
We know our products. Always the correct part. T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. T04E T3T4 Turbo/Turbocharger +oil Return/feed Line +Td42 Manifold For Nissan. Introduction: Looking to boost your car’s power? Is your car’s original turbocharger not performing well, or does it need replaced? Maxpeedingrods stocks all the best quality turbochargers, turbo parts to give your car the power, performance and reliability you deserve. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application: This item fits: Universal Application. For 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP Maximum 18PSI (1.2Bar). Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooled Wastegate: External Wastegate Bearing Type: Journal Bearing Compressor: Trim: 48.1 A/R: 0.5 Inducer: 52.7 Exducer: 76 ———————- Turbine: Trim: 74.2 A/R: 0.57 Inducer: 64.8 Exducer: 55.8 ———————- Compressor outlet: 42mm(inside diameter), 52mm(Outer diameter) Compressor inlet: 68 mm(inside diameter), 77mm(Outer diameter). About Turbo Oil Return Line & Oil Feed Line. Turbo Flange: T3 flange Mount Type: top mount / high mount External Wastegate: 38mm. Include: same as picture. 100% BALANCING TEST, This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. All of the materials we use are the best materials, and we believe that only the best materials will guarantee the life of the turbo. Turbine Wheel: the special K418 alloy to achieve stability under high temperatures up to 900 degrees Celsius, and never use K13 Inconel alloy. Turbine housing : Ductile iron QT450-10 can withstand temperatures up to 700 degrees Celsius Aluminum blades : Precision machining forging. NOTE: 100% Brand New Professional Installation is Highly Recommended, Instruction is NOT Included Additional parts will be needed for a complete installation. Please consult professional turbo installer for details. Does NOT have a internal wastegate so you must have a external wastegate on your manifold. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Then, the updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Cartridge FOR VW Golf Polo Scirocco Tiguan Touran 1.4 TSI K03 Turbo Center Chra. TURBO 53039700248 for SEAT VW ALHAMBRA GOLF POLO SCIROCCO TOURAN 1.4TSI manifold. Turbocharger for Audi A4 A6 B5 C5 B6 1.8T 53039880029 k03S turbine 53039880005. Turbocharger Cartridge Chra for Renault Megane Laguna 1.9dci F9Q GT1749V 708639. Turbocharger Core Cartridge GT2052V 752610 for Land-Rover Defender 2.4DCI 140HP. Racing Connecting Rod for Renault R5 Turbo 11 131mm ARP2000 Tuv Certificate. Turbocharger Cartridge Chra Core for BMW 320d E90 E91 120d E87 49135 160bhp. Turbo Cartridge Core 53039700163 for BMW Mini Cooper S R55 R56 R57 R58 R60 R61. Turbo T25 T28 GT25 GT28 GT2871 GT2860 universal A/R. 64 Turbolader w/ gaskets. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “aplusmarkets” and is located in this country: GB. This item can be shipped to United Kingdom.
  • shipping time to UK notice: 2-4 b.d. from UK
  • Balance tested?: YES, twice balanced turbo
  • Brand: BFO
  • Compressor A/R: 0.5
  • Compressor Inducer /Exducer (MM):: 52.7, 76.00
  • Compressor Trim:: 48.1
  • Cooled type: Oil cooled
  • Exhaust (Turbo Manifold) Flange :: Standard T3, T4 4-Bolt
  • Exhaust Outlet Flange: Standard T3 5-Bolt
  • Important Notice: Package Included: Just like the picture, Professional installation required
  • Intended Use: Modification, Enhancement
  • Manufacturer Part Number: X1ZK2F
  • Materials: Cast Iron,Steel Turbo Housing, Aluminum Controller
  • Note: No Instruction Included
  • Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
  • Other Part Number: for 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP
  • Reference OE/OEM Number: t3 t4 t04e 0.57 0.5 universal turbo, turbocharger turbolader, Maximum 18PSI (1.2Bar), Turbo/Turbocharger +oil Return/feed Line +Td42 Manifold, for Nissan Safari / Patrol 4.2L TD42, For TB42, TB45, TD45
  • Turbine A/R:: 0.57
  • Turbine Inducer / Exducer (mm):: 64.8, 55.8
  • Turbine Trim:: 74.2
  • Type: Turbocharger turbo
  • Warranty: 2 Year
  • Wastegate: External Wastegate

T04E Turbo Turbocharger Manifold Kit + Oil Lines For Nissan Patrol Y60 Y61 new
For-BMW-92-99-E36-M50-M56-T3T4-63-Turbo-Kit-Intercooler-BOV-Manifold-01-kbz

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
This Turbo kit comes charger, which is perfect upgrade your car and get more boost. Your car will gain 150-200HP if you set at 7-15PSI. Customers require upgrade the fuel pump, injector and ECU to tune the car if you set at higher PSI. This kit can max up to 650HP. 63 turbo charger max up to 550HP. Turbine Flange: T3 Flange. Downpipe Flange: T3/T4 5 Bolt Flange. Type of Bearing: Journal Bearings. UNIVERSAL2.5 PIPING KIT. Brand new universal 2.5 polished aluminum piping kit. Made of high quality T6061 aluminum. THIS PIPING KIT IS UNIVERSAL, IT IS NOT BOLT ON TYPE. CUSTOMERS NEED TO CUT AND BENT THE INTERCOOLER PIPE TOFIT YOUR CAR. 30.5X12X3.0 FRONT MOUNT INTERCOOLER. Brand new universal 30.5x12x 2.5 Bar and Plate front mount intercooler. Made of high quality T6061aluminum. Support up to 650HP and 40PSI. Compress air flow rate: 700cubicfeet/min. Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI. Full size: 30.5x 12×3.0. Inlet/Outlet: 2.5 Core size: 24x 12x 3.0. RSBLOW OFF VALVE BOV. Brand new RS turbo blow off valve bov. Made of high-quality CNC billet aluminum and anodized finished. Including O-ring, hardware and flange. 38MM2 BOLT TURBO WASTEGATE. Brand new universal 38mm 2 bolt wastegate, made of high-quality CNC billetT6061aluminum housing for heat disbursement, includes stainless steel hardware bolts. Inconel base housing with forged stainless-steel valves construction. Heavy duty actuator springs withstands temperatures up to 490 degrees Celsius. Set at 9PSI, adjustable spring rate with use of any boost controller. Brand new 10AN oil drain/return line kit, made of high quality stainless steel braided line and T6061 aluminum fitting. Helps circulate oil from the turbo to the oil pan. Brand new oil feed line, made of high-quality stainless steel braided line. Special designed inlet adapter limits oil flow, effectively prevent blown oil seal caused by excessive oil pressure. Comes with one 1/8 NPT male fitting and one 4AN male fitting. Has restriction build in, offers proper oil feeding to the turbo charger. Brand new fuel pressure regulator. Made of high quality CNC machined aluminum. Includes hardwares and hoses for installing. Adjustable 0-140 PSI(0-10kg/cm) for maximum fuel pump capacity. Brand new turbo boost controller. Made of high-quality CNC machined T6061 aluminum with anodized finish. Comes with hardware for easy installing. Allow you to adjusts ratings(1-30PSI) without changing the wastegate springs as well as replacing the wastegate springs. Brand new pen style turbo timer. Made of high quality. A turbo timer is a device designed to keep an automotive engine running for a pre-specified period of time in order to automatically execute the cool-down period required to prevent premature turbowear and failure. A turbo timer can be programmed to leave the engine runningfor a pre-specified period of time even after the driver has exited and lockedthe vehicle. After a period of driving when a turbocharger has been workinghard, it is important to let the engine run at idle speed for a period of time, allowing the compressor assembly to cool from the lower gas temperatures in both the exhaust and intake tracts. At the same time the lubricating oil from the engine is able to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at high speed. High Performance Turbo Racing Design with Corrected Wastegate Port Angle for Improved Fitment. Made of High-Quality Cast-Iron Material for Strength and Durability. Increase Engine Exhaust Output and Efficiency. 38mm/ 35mm External Wastegate Port and Flange Included. Standard T3 or T3/ T4 Hybrid Configuration Outlet. 255 LPH Flow Rate. Professional Installer Is Highly Recommend (No Instruction Included). Exactly Same as the Picture. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. IMPREZA 2.5 RS. Electra & Park Avenue. The item “For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold” is in sale since Thursday, February 1, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “2xspeed” and is located in Baldwin Park, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Type: Turbo Kit
  • Manufacturer Part Number: Turbo Kit # 8 MFC BMW E36
  • Placement on Vehicle: Front
  • Brand: EmotorUSA
  • Fitment Type: Performance/Custom
  • Manufacturer Warranty: 90 days after purchase day

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
For-BMW-92-99-E36-M50-M56-T3T4-63-Turbo-Kit-Intercooler-BOV-Manifold-01-jqsc

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
New Brand BMW 92-99 E36 M50 M56 T3T4. 63 Turbo Kit Intercooler BOV Manifold. This Turbo kit comes charger, which is perfect upgrade your car and get more boost. Your car will gain 150-200HP if you set at 7-15PSI. Customers require upgrade the fuel pump, injector and ECU to tune the car if you set at higher PSI. This kit can max up to 650HP. 63 turbo charger max up to 550HP. Turbine Flange: T3 Flange. Downpipe Flange: T3/T4 5 Bolt Flange. Type of Bearing: Journal Bearings. UNIVERSAL2.5 PIPING KIT. Brand new universal 2.5 polished aluminum piping kit. Made of high quality T6061 aluminum. THIS PIPING KIT IS UNIVERSAL, IT IS NOT BOLT ON TYPE. CUSTOMERS NEED TO CUT AND BENT THE INTERCOOLER PIPE TOFIT YOUR CAR. 30.5X12X3.0 FRONT MOUNT INTERCOOLER. Brand new universal 30.5x12x 2.5 Bar and Plate front mount intercooler. Made of high quality T6061aluminum. Support up to 650HP and 40PSI. Compress air flow rate: 700cubicfeet/min. Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI. Full size: 30.5x 12×3.0. Inlet/Outlet: 2.5 Core size: 24x 12x 3.0. RSBLOW OFF VALVE BOV. Brand new RS turbo blow off valve bov. Made of high-quality CNC billet aluminum and anodized finished. Including O-ring, hardware and flange. 38MM2 BOLT TURBO WASTEGATE. Brand new universal 38mm 2 bolt wastegate, made of high-quality CNC billetT6061aluminum housing for heat disbursement, includes stainless steel hardware bolts. Inconel base housing with forged stainless-steel valves construction. Heavy duty actuator springs withstands temperatures up to 490 degrees Celsius. Set at 9PSI, adjustable spring rate with use of any boost controller. Brand new 10AN oil drain/return line kit, made of high quality stainless steel braided line and T6061 aluminum fitting. Helps circulate oil from the turbo to the oil pan. Brand new oil feed line, made of high-quality stainless steel braided line. Special designed inlet adapter limits oil flow, effectively prevent blown oil seal caused by excessive oil pressure. Comes with one 1/8 NPT male fitting and one 4AN male fitting. Has restriction build in, offers proper oil feeding to the turbo charger. Brand new fuel pressure regulator. Made of high quality CNC machined aluminum. Includes hardwares and hoses for installing. Adjustable 0-140 PSI(0-10kg/cm) for maximum fuel pump capacity. Brand new turbo boost controller. Made of high-quality CNC machined T6061 aluminum with anodized finish. Comes with hardware for easy installing. Allow you to adjusts ratings(1-30PSI) without changing the wastegate springs as well as replacing the wastegate springs. Brand new pen style turbo timer. Made of high quality. A turbo timer is a device designed to keep an automotive engine running for a pre-specified period of time in order to automatically execute the cool-down period required to prevent premature turbowear and failure. A turbo timer can be programmed to leave the engine runningfor a pre-specified period of time even after the driver has exited and lockedthe vehicle. After a period of driving when a turbocharger has been workinghard, it is important to let the engine run at idle speed for a period of time, allowing the compressor assembly to cool from the lower gas temperatures in both the exhaust and intake tracts. At the same time the lubricating oil from the engine is able to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at high speed. High Performance Turbo Racing Design with Corrected Wastegate Port Angle for Improved Fitment. Made of High-Quality Cast-Iron Material for Strength and Durability. Increase Engine Exhaust Output and Efficiency. 38mm/ 35mm External Wastegate Port and Flange Included. Standard T3 or T3/ T4 Hybrid Configuration Outlet. 255 LPH Flow Rate. Professional Installer Is Highly Recommend (No Instruction Included). Exactly Same as the Picture. Please Domestic Lower 48 US States:Free. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. We specialize in aftermarket automotive car parts and is the One of Top industry distributor for Competitive prices and quality products. Now we have 2warehouses located in LA and Chicargo. The item “For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold” is in sale since Wednesday, June 26, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “dxsautoparts” and is located in Baldwin Park, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Type: Turbo Kit
  • Manufacturer Part Number: Turbo Kit # 8 MFC BMW E36
  • Placement on Vehicle: Front
  • Brand: EMUSA
  • Fitment Type: Performance/Custom
  • Manufacturer Warranty: 90 days after purchase day

For BMW 92-99 E36 M50 M56 T3T4.63 Turbo Kit Intercooler BOV Manifold
CXRacing-T3-Turbo-Manifold-Kit-for-BMW-E46-3-Series-M52-M54-Engine-NA-T-01-nbop

CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T

CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T

CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
Does NOT Fit M3. This New Turbo Manifold Kit Is A New Development From CXRacing Bolt On Fit Manifold, No Cut. Fits GT35 or Smaller Turbo. DP Is 4-Bolt Flange, 2.5″ then Enlarge to 3″ Stainless Steel Pipe Manifold. Completely New Design, No Cut, Perfect Fit. Supports T3 GT35 Turbo, up to 500 HP. 304 Stainless Steel Manifold, T3 Top Mount, with 38mm WG Dump Tube DP. 2.5″ Pipe Connection to Turbo, with Enlarged 3″ Vband Tailed End. 2nd Pipe Is 3. 4 Bolt Flange Fits Turbo with 2.5 4-Bolt Pattern, Like GT35 This Is Manifold Kit ONLY. No Installation Instruction Is Provided. But We Show Many Installed Pictures on This Listing and Installation Notes. It Is Very Intuitive. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Chassis: 98-06 BMW E46. Motor: Factory M52 M54 Engine. Turbo: Top Mount T3. This Listing is for the Part Listed Below ONLY, All Other Parts Shown are NOT INCLUDED. Manifold with Dump Tube. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T” is in sale since Tuesday, July 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “cxracing” and is located in South El Monte, California. This item can be shipped worldwide.
  • Manufacturer Part Number: 1027207005374
  • Brand: CXRacing

CXRacing T3 Turbo Manifold Kit for BMW E46 3 Series M52 M54 Engine NA-T
CXRACING-NA-T-T3-Top-Mount-Turbo-Manifold-Kit-for-BMW-E46-M52-M54-Engine-01-bsov

CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine

CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine

CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
Does NOT Fit M3. This New Turbo Manifold Kit Is A New Development From CXRacing. Bolt On Fit Manifold, No Cut. Fits GT35 or Smaller Turbo. DP Is 4-Bolt Flange, 2.5″ then Enlarge to 3″ Stainless Steel Pipe. This Is Manifold Kit ONLY. This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Chassis: 98-06 BMW E46. Motor: Factory M52 M54 Engine. Turbo: Top Mount T3. Items included in this listing. Manifold with Dump Tube. Manifold: Completely New Design, No Cut, Perfect Fit. Supports T3 GT35 Turbo, up to 500 HP. 304 Stainless Steel Manifold, T3 Top Mount, with 38mm WG Dump Tube. DP: Stainless Steel Tube 2.5″ Pipe Connection to Turbo, with Enlarged 3″ Vband Tailed End 2nd Pipe Is 3″ 4 Bolt Flange Fits Turbo with 2.5″ 4-Bolt Pattern, Like GT35. No Installation Instruction Is Provided. But We Show Many Installed Pictures on This Listing and Installation Notes. It Is Very Intuitive. Product/s are GUARANTEED brand new in the box. Professional installation is highly recommended. PR, Guam, VI, AK , APO, HI. The item “CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine” is in sale since Thursday, August 1, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “just-intercoolers” and is located in South El Monte, California. This item can be shipped worldwide.
  • Manufacturer Part Number: 1027209005374
  • Brand: CXRacing

CXRACING NA-T T3 Top Mount Turbo Manifold Kit for BMW E46 M52 M54 Engine
Turbo-Kit-T3-T4-for-91-00-BMW-E36-323-325-328-M3-3-SERIES-IC-WG-BOV-Manifold-BL-01-ji

Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL

Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL

Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL
Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL. HWC has the best products with the best prices. We believe in Safety and Standards in both machining and manufacturing. Unlike our competitors who offer you low prices for inferior products, we build products that lift and level your vehicle without compromise. Includes 1 T3/T4 Turbocharger. Includes 1 Front Mount Intercooler. Includes 1 Turbo Manifold. Includes 8 Silicone Coupler. Includes 16 T-Bolt Clamp. Includes 1 Air Filter. Includes 1 Blow off Valve. Includes 1 External Wastegate. Includes 1 Boost Controller. Includes 1 Oil Feed Line. Includes 1 Oil Return Drain Line. Includes 1 T3 5 Bolt Exhaust Flange. Fits BMW E36 & E46. 2.5L, 2.8L, 3.0L M3(E36) & 3.2L S52 (except E46 M3 3.2L). 100% Brand New T3/T4 Hybrid Turbocharger! Cast housing with durable steel. Capable of boosting horse power up To 350+ BHP, standard 4 bolt exhaust flange, Capable of 8 PSI or 15-25 PSI output at peak power. Internal wastegate setting: 8 PSI. High quality t04e with a forged turbine propeller wheel! Standard 5 bolt T3 Downpipe Flange. 5 Bolt Standard Hot Side. Oil Inlet – 1/8 NPT Oil Inlet. Bearing Type – Journal Bearing. Cooling Type: Oil Cooled. T04B/T4 Type Compressor Housing. 8 Blade Type T4 Compressor Wheel. T3 Type 4 Bolt Turbine flange. 5 bolt Exhaust flange. 2.48″ Minor and 2.89″ Major Propellar. 6061 Light Weight Billet Aluminum Construction. Tube & Fin Light Weight Design. Construction: Machine Cut and Stamped Hand Welded. Hot Air Temperature: 32°F302°F (0°C150°C). Compress Air Flow Rate. Overall Size – 27″ x 7″ x 2.5. Core Size – 21″ x 6.5″ x 2.5. In/Outlet – 2.5″ OD / 2.25″ ID. Standard T3 (T03/ T04) Turbo Flange Configuration Outlet. Botton Mount Hi-Performance Racing Design. Included Wastegate Flange for 35mm/38mm external WG. Increase Engine Intercooler Output and Efficiency. Made of High Quality Cast Material for Strength and Durability. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping. 2.5 Piping Diameter. 2.0mm Pipe Thickness. Increase 65% Air Flow comparing with other Standard Piping. Material:Made of high quality silicone material. Thickness of wall:5 mm, 4 ply reinforced. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI). Bursting Pressure: 2 Mpa. Working Temperature: -76°F (-60°C) to +500°F (+260°C). Size tolerance:+/-0.5 mm. Made of High quality 301 SS Stainless Steel Clamp. Stainless steel construction resists corrosion. Provide uniform sealing pressure for a positive. Polished finish increases engine bay aesthetics. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable. Improves Up to 95% Filtration Efficiency. Designed to increase horsepower and acceleration. Width: 6″ Inlet: 3.0″ Overall Tall: 3.5″ Mesh Tall: 2.5″. Aggressive JDM racing discharge sound. 8 Discharge ports that draw in surrounding air and release a unique discharge sound. 40mm hard-anodized valve for increased airflow. Dual spring system promoted response and allows for high boost pressures. Support up to 30 PSI boost pressure. OIL DRAIN FEED LINE. Inner Diameter: 0.50. CNC Machined Turbo Adapter Plate. Weldable 10AN Oil Pan Fitting Included. Inner Diameter: 0.25. 1/8 NPT Fittings Natural Polish Finish. Brass Fitting Block Fitting and Port Cover Included. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs. High Performance Manual Boost Control From 030 psi Capacity. CNC Machined Light Weight and Resistant to Rust. Hose clamp and all necessary hardware for complete installation. High strength Alloy aluminum body with steel head. Comes with 7 psi spring installed. Protect the turbo system from over boosting. Complete install kit included. High Quality Cast Raw Steel. 5 bolt for T3 Turbo. Single Entry T3 Turbo Flange. 12mm(almost 1/2) Thick. Bolt Diameter: M10 Thru Holes. Holes, Holes Are Drilled Through, Not Threaded. Fits all T3 and T3/T4 hybrid turbos with 5 bolt standard size outlet. Ready to welded to any Exhaust Pipe. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. Color may randomly selected depend on hand or inventory. Modification might required for complete installation. Professional TURBO INSTALLER is Highly recommend. Surcharges will be added to VI, PR, HI, AK, MP, AS. Ships from USA (west coast). We Strive To Respond In A Timely Fashion! E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays. We Would Very Much Appreciate A Chance To Make Things Right! The item “Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL” is in sale since Tuesday, June 29, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “heavyweightchampion” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Interchange Part Number: Fit BMW i6 2.5L, 2.8L, 3.0L M3
  • UPC: n/a
  • Finish: Steel / Cast / Aluminum / Silicone
  • Manufacturer Part Number: TBK-8P25CHBM1921100BK-BL
  • Manufacturer: FABRICATION TURBOCHARGER KIT
  • Placement on Vehicle: Front, Left, Right
  • Other Part Number: E36 323i 325i 328i M3
  • Brand: HEAVYWEIGHTCHAMPION

Turbo Kit T3/T4 for 91-00 BMW E36 323 325 328 M3 3-SERIES IC WG BOV Manifold BL