Tag Archives: intercooler

Mtc Motorsport Bmw M2 N55 Turbo Front Mount Intercooler

June 20, 2024motorsportfront, intercooler, motorsport, mount, turboadmin

MTC Motorsport BMW N55 M2 Front Mount Intercooler, also fits many other models. We have engineered these intercoolers using a bar and plate core matched to our flowed cast end tanks. This is the most efficient way to keep the intake temperatures low. We have tested our intercoolers on a few vehicles and found they have absolutely fantastic results. The IAT compared to the standard intercooler are reduced massively which means you get consistent increased performance. The standard intercooler and the MTC intercooler both had intercooler intake temperatures of between 135-140 degrees through 5 runs on the road. At the other side of the intercooler into the engine the standard intercooler temps were between 75-80 degrees whereas the MTC intercooler temperatures were in the high 20’s over all 5 runs. The MTC intercooler features a massive 5 competition core with flowed cast end tanks and 4 rows extra at the front to increase the surface area. We have added a fin to the inside of the casting on the intake side to direct some of the airflow up through the top 4 extra cores. This intercooler weighs 11.5kg and provides near 100% more volume and 90% more surface area than the standard intercooler. Dimensions are 520mm X 215mm X 145mm which is a huge increase on the standard intercooler. For comparison, these dimensions are the exact same as the Wagner dimensions. The intercooler is a direct fit and there are some great videos on YouTube to follow. However, professional installation is recommended and should take approximately 1-2 hours. We would go as far as to say this is the best intercooler on the market for these models. The intercooler will fit plug and play with the following vehicles. BMW 114i F20 / F21 75KW/102PS (2012+). BMW 116i F20 / F21 100KW/136PS (2011+). BMW 118i F20 / F21 125KW/170PS (2011+). BMW 125i F20 / F21 160KW/218PS (2012+). BMW M135i F20 / F21 235KW/320PS (2011+). BMW 114d F20 / F21 70KW/95PS (2012+). BMW 116d F20 / F21 85KW/116PS (2011+). BMW 118d F20 / F21 105KW/143PS (2011+). BMW 120d F20 / F21 135KW/184PS (2011+). BMW 125d F20 / F21 160KW/218PS (2012+). BMW 220i F22 / F23 135KW/184PS (2014+). BMW 228i F22 / F23 180KW/245PS (2014+). BMW M235i F22/F23 240KW/326PS (2014+). BMW 218d F22 / F23 103KW/143PS (2014+). BMW 220d F22 / F23 135KW/184PS (2014+). BMW 225d F22 / F23 160KW/218PS (2014+). BMW 316i F30 / F31 / F34 100KW/136PS (2011+). BMW 320i F30 / F31 / F34 135KW/184PS (2011+). BMW 328i(x) F30 / F31 / F34 180KW/245PS (2011+). BMW 335i(x) F30 / F31 / F34 235KW/320PS (2011+). BMW 316d F30 / F31 / F34 85KW/116PS (2012+). BMW 318d F30 / F31 / F34 105KW/143PS (2012+). BMW 320d F30 / F31 / F34 135KW/184PS (2011+). BMW 325d F30 / F31 / F34 160KW/218PS (2013+). BMW 330d F30 / F31 / F34 190KW/258PS (2012+). BMW 335d F30 / F31 / F34 230KW/313PS (2013+). BMW 420i F32 / F33 135KW/184PS (2013+). BMW 428i F32 / F33 180KW/245PS (2013+). BMW 435i F32 / F33 225KW/306PS (2013+). BMW 420d F32 / F33 135KW/184PS (2013+). BMW 425d F32 / F33 160KW/218PS (2014+). BMW 430d F32 / F33 190KW/258PS (2013+). BMW 435d F32 / F33 230KW/313PS (2013+).

For BMW E39 530d 525d Silicone EGR Intercooler Turbo Boost Hose Pipe Kit Blue

June 18, 2024530d525d, 530d, blue, boost, hose, intercooler, pipe, silicone, turboadmin

CMS Brand is a company which is professional designed to Silicone Hoses Kits. Our Silicone Hoses are premium quality, hand crafted and high performance. Which can work under greater levels of temperature & pressure which is essential when you’re upgrading your engine’s performance. We have all kinds of silicone hose kits and we also Provide Custom Made hose kits to fit your special needs. Material: High Temp Reinforced Silicone. Thickness: 4-Layer (5.4mm). Available Color: Black / Blue / Red / Green / White / Yellow / Pink / Purple / Orange / Grey and so on, please message us which color you want to get. Bursting Pressure: 245 PSI. Temperature Range: -76°F (-60°C) to +500°F (+260°C). Working Pressure: 0.3 – 0.9 Mpa. Size tolerance: +/-0.5mm. Easy to install, Installation instructions not included. High quality, hand crafted silicone hose with 5.4mm thickness. Be made to exacting specifications and overbuilt to ensure strength and longevity. Package included: 1 set Silicone hoses in Blue (4 pieces) (please message us if you don’t want to come with CMS LOGO). You can track the packages on website.

Competition Intercooler Kit For EVO3 BMW 135i E82/E88 E90/E91/E92/E93 N54&N55

June 16, 2024competition135i, competition, e82e88, e90e91e92e93, evo3, intercooler, n54n55admin

Competition Intercooler Kit EVO III BMW 335(x)i E90/E91/E92/93 ;335is E92 ;135i E82/E88;1erM E82 N54 & N55. The intercooler kit EVO III Competition fits the following vehicles with N54 & N55 engines. Our high performance intercooler offers an impressive 162% larger flow area and a whopping 182% more intercooler volume compared to the stock intercooler. This intercooler core ensures efficient heat transfer and optimizes airflow for maximum cooling. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analyses in the CFD system. This guarantees excellent cooling performance with minimal backpressure. The intercooler’s inlets and outlets have been widened to ø70mm to ensure maximum airflow. Our EVO3 kit includes everything you need for installation, including reinforced silicone hoses. Replacement with the stock intercooler is simple and straightforward (plug and play). The anti-corrosion coating with heat conduction properties ensures long-lasting and optimal cooling. This kit was developed for highest performance requirements and is tested and pressure stable up to 6 bar. Doesn’t come with installation instructions. We recommend professional installation Only. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

Intercooler Charge Boost Pipe Turbo Kit For BMW N55 X5 X6 E70 E71 F15 F16 35i ix

June 16, 2024intercoolerboost, charge, intercooler, pipe, turboadmin

Intercooler Charge Boost Pipe Turbo Kit For BMW N55 X5 X6 E70 E71 F15 F16 35i ix. 2010+ E70 BMW X5 35i & 35iX N55 engine 2008+ E71 BMW X6 35I & 35IX N55 engine. Description: The BMW Competition Intercooler Kit EVO III The high performance intercooler core provides a 113,5% larger frontal area and 120% more volume compared to the stock mounted intercooler. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum end-tanks optimized by CFD for best possible internal airflow. We use lightweight design of intercooler Despite of it’s size the weight of the complete intercooler is only 6.7kg. Note: Doesn’t come with installation instructions We recommend professional installation Only. It is YOUR responsibility to pay for the custom duty not us. We have no control over your country`s custom department so we have no idea how much they charge.

Front Mount Turbo Core Intercooler Kit For BMW E87 E88 E90 130D 135D 335D 135I

June 15, 2024front130d, 135d, 135i, 335d, core, front, intercooler, mount, turboadmin

By fitting an upgraded intercooler is a great way of safely increasing the horsepower of your car. This is done by reducing the engine’s inlet temperatures, a denser air charge will enter the engine. This makes more power at the same boost level. Fit straight onto the original pipe work and location so no modifications are required. 5.75 Thickness core Stepped design. Bar and Plate Design. Power coated in black with aluminuim end tanks. Additional rows at the front which increases the surface area. Intercooler dimensions: 520mm x 185mm x 150mm (stepped design). 80% more volume and surface area than the original For BMW intercooler. Bolt on fit for the following models. For BMW E87/E88 130D/135D/135I. For BMW E90 325D/330D/335D/335I. For BMW E91 325D/330D/335D/335I. For BMW E92 325D/330D/335D/335I. For BMW E93 325D/330D/335D/335I. Leave us your Tel no after paid if you did not left in the registeration form. We reserved the right to reject any return or exchanges. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Then, the updated result will be informed.

7.5 Turbo Intercooler & Pipe Kit for BMW E82 135i 08-11 E92 335is 11-12 N54 N55

June 14, 2024turbo08-11, 11-12, 135i, 335is, intercooler, pipe, turboadmin

1 x 7.5” Stepped Aluminum Intercooler 1 x aluminum intercooler piping Note: Doesn’t come with Installation Instructions As you may know these are after market parts We recommend professional installation only. Upgrade Stepped Intercooler Kit. 1 x 7.5” Stepped Aluminum Intercooler 1 x aluminum intercooler piping. Note: Doesn’t come with Installation Instructions As you may know these are after market parts We recommend professional installation only. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

Performance Intercooler Kit for BMW 128i 228i 320i 328i 420i 428i N20 N26 Turbo

June 13, 2024performance128i, 228i, 320i, 328i, 420i, 428i, intercooler, performance, turboadmin

Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks Anti corrosion protective coating Charge Pipe Boost Pipe Kit Increase throttle response and decreases turbo lag. Retains factory style o-ring throttle body lock flange. Compatible with the factory electronic diverter valve. Note: Doesn’t come with installation instructions We recommend professional installation Only. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. A lot less pressure drop than stock intercooler. Maximum cooling performance with clearly more power. Anti corrosion protective coating with perfect thermal heat dissapating character. Charge Pipe Boost Pipe Kit Increase throttle response and decreases turbo lag. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick and easy connection and disconnection to throttle body. Precision CNC machined MAP sensor flange ensures leak free connection. Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

For 06-11 BMW N54 3.0L 135i E82/E88 335i/E90/E92/E93 Twin Turbo Intercooler Kit

June 12, 202406-1106-11, 135i, 335ie90e92e93, e82e88, intercooler, turbo, twinadmin

Fuel Supply & Treatment. Intake & Exhaust System. FMIC Intercooler Kit For BMW N54 3.0L 135i E82/E88 335i/335xi E90/E92/E93 Blue. Don’t let your N54 performance disappear into thin air. The front mount intercooler makes a good thing better with improved air flows and faster heat removal. This oversized cooler bolts on in place of the factory original, and has been thoroughly tested in both stock and performance tuned engines. We testing indicates that the free-flowing bar and plate design reduces internal pressure loss, while its larger external dimensions move more heat to the atmosphere. 2x polyester reinforced High temperature silicone hose. Doesn’t come with installation instructions. As you may know these are after market parts. We recommend professional installation Only.

EVO III Competition Turbo Intercooler Kit for BMW E82 135i/1M E9X 335i N54

June 10, 2024competition135i1m, 335i, competition, intercooler, turboadmin

Inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. Inlet and Outlet increased to Ø70mm The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Description: Provides a 162% larger frontal area and 182% more volume compared to the stock mounted intercooler. Inlet and Outlet increased to ø70mm The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).