Tag Archives: intercooler

T04E T3 T4 Turbo Charger + 27 x 7 x 2.5 2.5 Intercooler 64mm Turbo Pipe Kits

April 9, 2023t04e64mm, charger, intercooler, kits, pipe, t04e, turboadmin

We know our products. Always the correct part. T04E T3 T4 Turbo Charger + 27 x 7 x 2.5 2.5 Intercooler 64mm Turbo Pipe Kits. This is universal application turbo, so modification might be required for some vehicles. Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines. T04E Turbocharger with Internal Wastegate. Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust Outlet Flange: V-Band Flange (ID/OD: 2.5″/3.1″) Intake Inlet/ Outlet: 3.00″/ 2.00″. Turbine Side: Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust outlet : 79mm Turbine exhaust inlet: 44.7mm (length) /85.8mm (width). Compressor Side: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet:78 mm Compressor inlet:51.5 mm. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate: w/ Wastegate Thrust Bearings: 270 Degrees Hosepower: Up to 420 HP. 2.5 Universal Aluminum Intercooler Pipe. Made out of high quality of 6061 aluminum Manual polishing finished -Manufactured from high quality aluminum for durable use: -Straight Layout and Appropriate Pipes’ Radius lead to less pressure loss -High Pressure Resistant Hoses bring out high performance of intercooler -All pipes are well externally polished -All intercoolers are bar & plate design for better cooling efficiency -Professional Installation Is Highly Recommended -Pipe Thickness: 1.8mm -Pipe length: 18. 27x7x2.5 2.5 Universal Intercooler. Inlet/outlet size: 2.5″ -Core size: 21″x 7″x 2.5″ -Full size: 27.00″ (L) X 7.00″ (H) X 2.50(W) -Compress Air Flow Rate. 1x T04E V-Band Turbocharger 1x 27x7x2.5 2.5″ Universal Intercooler 2x 90 Degree Aluminum Pipe 2.5″ 2x Straight aluminum pipe 2.5″ 2x 135 Degree Aluminum Pipe×2 2.5″ 2x U Aluminum Pipe×2 2.5″ 6x Straight Silicon Hose 2.5″ (Blue) 2x 90 Degree Silicone Hose×2 2.5″(Blue) 16x Clamps 2.5″. Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Performance H beam 4340 EN24 Conrod Con Rods for Audi S2 RS2 2.2L 5cyl 20V turbo. K03 Turbo Core CHRA For Audi TT Seat Leon Toledo 2.0 TFSI 200 HP BWA BPY. 1x HT12 Turbocharger Cartridge Chra Core For Nissan Navara D22 ZD30 3.0L HT1219B. Turbocharger fit Nissan Skyline RB20 RB25 RB20DET RB25DET engine turbo w/ gasket. Turbocharger FOR Opel Movano A 2.5dCi G9UK03 53039700055 4432306 exhaust Turbo. Universal Turbo t3 flange pipe bov wastegate turbocharger kits for 1.5-3.0L. Turbo Cartridge Turbo Chra for VW VOLKSWAGEN Transporter T4 2461ccm 102HP 75KW. Turbocharger for Audi A4 2.0L 2.0TDI 138HP 103KW engine BPW 2005 2006 Turbolader. T3 T4 T04E Turbo charger. R Turbine Power up to 450HP for 1.6L-2.3L engine. Street K03 Turbo charger Upgraded for Audi A4 Quattro A6 VW Passat 1.8T New. Billet VGT Turbo for Audi A3 VW Touran VW Passat 103Kw 140HP BKD 2.0 TDI. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped to United Kingdom.

Application: Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines
Boost PSI: 0.5bar – 1bar ( 7.3psi – 14.5psi )
Brand: BFO
Compressor A/R: 0.5
Cooling type:: Oil cooled
Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
Exhaust Outlet Flange: V-Band Flange
Fitment Type: Direct Replacement
Manufacturer Part Number: XI8V5J
Manufacturer Warranty: 2 Years
Placement on Vehicle: Front
Reference OE/OEM Number: T3 T04E UPGRADE TURBO CHARGER TURBINE, with 27x7x2.5 intercooler, 2.5 inch intercooler pipe, universal turbocharger kit, exhaust gas turbine kit
Superseded Part Number: Front Mount Intercooler/Inter cooler
Turbine A/R: 0.63
Type: Turbo Charger
Universal Fitment: Yes
Feature: ESCP

T04E Universal Turbo Kit T3 flange Universal Intercooler piping Type-S BOV

March 30, 2023t04eflange, intercooler, piping, t04e, turbo, type-s, universaladmin

We know our products. Always the correct part. T04E Universal Turbo Kit T3 flange Universal Intercooler piping Type-S BOV. Universal Turbo Kit Perfect for 1.5L-3.0L engine, 4/6 cylinder This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification and other accessories to complete the Turbo Kit Project). Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm(2.8″) Compressor Outlet Diameter: 53mm(2″). Bearing Type: Wet Float Bearing Cooling Type: Oil Cooling Thrust Bearing: 270 degree Horsepower: Up to 400HP Oil Inlet: 1/8 NPT Turbo Type: Individual Condition: 100% Brand New Accessories: You will get exactly as shown as picture above. Other specification in the kit : 1 x Intercooler: Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size – tube and fin style. Intercooler core size: 2172.5 1 x Universal turbo intercooler piping kit including: 2 x Straight Aluminum Pipe 2 x 45°Aluminum Pipe 2 x 75°Aluminum Pipe 2 x 90°Aluminum Pipe 6 x 2.5″ Straight Silicon Hose (Blue) 2 x 2.5″ 90 Degree Hose (Blue) 16 x 2.5″ Stainless Steel T-Clamp 1 x Type-S Blow Off Valve: 2.5″ Inch Type S/Rs Flange Pipe. 1 x BOV pipe: can install anywhere suitable 1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Gauge: 2 (52mm) Turbo Boost Meter Gauge. 1 x Turbo Boost Controller: 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. 1x 5 Bolt pipe: 2.5 t3/t4 5-bolt stainless steel TIG welded pipe. Package Size: 94x 46 x 45 cm Package Weight: 24600g. Turbo charger: Turbine housing: Ductile iron QT450-10 – temperature resistant up to 700? Steel turbine wheel: K418 alloy – high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production and own factory High-Speed oil seal ring and Precision clearance Built for durability and strength Technology Advantage: 100% balancing Test by TURBOTECHNICS VSR3 G3-min-Flow VNT Turbo testing Advanced Actuator Tester/Programmer. Intercooler core size:2172.5 cools down the turbocharged air efficiently Lightweight aluminum racing intercooler, Strong TIG welds will support high PSI levels. Intercooler piping kit Made of 6061 aluminum Lightweight yet strong aluminum piping High pressure silicone couplers and T-bolt clamps 5. Turbo Oil returen /Feeding line kit Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Blow Off Valve Kit CNC Billet Aluminum Type RS Style Blow off Valve Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Easily adjustable to prevent both permature boost leakage and compressor surge. Fast response One For Low And High Boost Pressure. Performance design produces a powerful and aggressive sound Quality design will not leak under high boost conditions Flanges can be installed at user discretion. 38MM Wastegate Most reliable wastegates For competition vehicles. Accurate boost control high quality appearance features Dual port design comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi. 5 Blot Turbo pipe CNC machined surface Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. BOV pipe/Adapter can install anywhere suitable. Turbo Boost Gauge Red LED Illuminated Needles. Comes with All the Wiring Necessary for Installation. All Accessories are Included for Installation. Accurately monitor boost pressures from the turbo system Back lit for use at night time. 1x Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo pipe 1x Turbo Boost Gauge 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve(Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit (You will get exactly as shown in the picture). Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Need modifications – Professionals ONLY This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. Other items you might also like. Billet Wheel Turbo T3/T4 T04E T3 A/R. 63 5 bolts Flange Turbocharger Oil Cooled. Turbocharger CHRA CARTRIDGE fit Seat Ibiza Cupra 1.9 TDI 150HP BPX. GT2256V turbocharger for Mercedes Benz Sprinter Van 2.7L 156HP 115kw 2000- 2003. Turbocharger Turbo for Mazda 3 6 CX-7 MPS MZR 2.3L Petrol K0422-882 256hp. TURBOCHARGER FOR Renault Master II 2.5 dCi G9U 114KW TURBO 93161963. K04 turbo For Pontiac Solstice GXP L850 2.0 250ps TURBOCHARGER 53049700184. Turbocharger for Fiat Ducato for Iveco Daily for Renault Master 2.8 99460981. Street Coilovers Kit for VW Polo Mk5 1.2 12v 1.4 1.6 16v Turbo GTi 6R 6C. Will this fit my car? When will my order be dispatched? What do I do if I have not received my order? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The message response might be delayed on Weekend, but we promise a response within 12 hours. Opening Hours:7 x 24. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “carsloyalpartner” and is located in this country: GB. This item can be shipped to United Kingdom.

Application: Universal Turbo Kit Perfect for 1.5L-3.0L engine, 4/6 cylinder
Brand: maXpeedingrods
Bundle Listing: Yes
Compressor A/R: 0.5
Exhaust Inlet (Turbo Manifold) Flange: T3/T4 Flange
Exhaust Outlet Flange: 5 Bolt Turbo
Finish: Matte
Fuel Type: Universal Application
Horse Power: This Kit Will be able to add 350+HP at 7.5-14.5 PSI.
Interchange Part Number: T3 T4 T04E UNIVERSAL TURBO CHARGER TURBOCHARGER
Intercooler: 27” x 7” x 2.5” inch, Inlet size: 2.5 inch
Items Included: Adapter, Clamps, Hoses, T-Bolts
Manufacturer Part Number: F8CHB7
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: @#It’s aftermarket replcement part@#
Package Include: 1x T3/T4 Turbocharger, 1x Oil Feed Line, 1x Oil Return Line, 1x 35/38mm Wastegate, 1x 5 Bolts Turbo exhaust pipe, 1x Turbo Boost Gauge, 1x Turbo Intercooler, 1x Tubo Boost Controller, 1x Type-S Blow Off Valve, 1x BOV Adapter( random color), 1x Turbo Piping Kit
Reference OE/OEM Number: T3 T4 t04e TURBOCHARGER, TURBO CHARGER turbocharger KIT with, Oil Feed return Lines hoses, 35/38mm Wastegate, 5 Bolt Turbo exhaust pipe, Turbo Boost Gauge, Turbo Intercooler, Boost Controller, Type-S Blow Off Valve ( random color), BOV Adapter and gaskets, Piping pipes Kit
Turbine A/R: 0.63
Turbo Cooling Type: Oil Cooled
turbo intercooler piping kit: 2 x Straight Aluminum Pipe, 2 x 45°Aluminum Pipe, 2 x 75°Aluminum Pipe, 2 x 90°Aluminum Pipe, 6 x 2.5” Straight Silicon Hose (Blue), 2 x 2.5” 90 Degree Hose (Blue), 16 x 2.5” Stainless Steel T-Clamp
Type: Turbocharger
Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style BOV,, 2.5\
Universal Fitment: Yes
Wastegate: 35/38mm External Waste Gate Kit
Feature: ESCP

3 Alloy Intercooler Turbo Charge Pipe Kit for BMW N55 F20 F30 F31 M235i

March 26, 2023alloyalloy, charge, intercooler, m235i, pipe, turboadmin

3 Alloy Intercooler Turbo Charge Pipe Kit for BMW N55 F20 F30 F31 M235i. 1x Charge Pipe Kit. Increase throttle response and decreases turbo lag. Throttle body matched 3 piping. Retains factory style o-ring throttle body lock flange. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick and easy connection and disconnection to throttle body. Ideal connection compared to the silicone hose and hose clamp connection found in all other aftermarket diverter valve upgrade pipes available in the marketplace. Precision CNC machined MAP sensor flange ensures leak free connection. Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Optional Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for complete installation. Other items you might also like. Black Wing Mirror Cover Cap For BMW F20 F21 F22 F30 F31 F32 F36 X1 E84 F87 New. 4x Tire Tyre Pressure Monitor Sensor for BMW F20 F21 F23 36106881890 36106856209. 01egd006bbl 19 Row 10an Universal Engine Transmission Oil Cooler+/filter Adapter. Intercooler Upgrade For BMW F20 F21 114i 125i F31 F30 316i / 328i F32 430d. 1x VARIABLE VALVE TIMING CONTROL SOLENOID VVT FOR BMW MINI MODELS. Charge Pipe + Boost Pipe Kit For BMW N55 3.0 T 335i 135i E82 E90 E91 E92 E93 New. AGR EGR for BMW N47 N57 1 2 3 4 5 6 7 ser X1 X3 X5 X6 11717823210 11717810871. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I pick it up at the warehouse? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts. Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc. MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel. This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “maxpeedingrodsgb” and is located in this country: GB. This item can be shipped to United Kingdom.

Brand: BFO
Bundle Listing: Yes
Fit for: For BMW N55 F20 F30 F31 M235i, 2012-2016 F30/F31/F36 for BMW 335i, 2012-2016 F32 for BMW 435, 2014-2016 F22/F23 for BMW M235, 2014-2016 F20 for BMW M135, 2016 F87 for BMW M2
Manufacturer Part Number: ELAZ0H
Model: N55
Note: No Instruction Included
Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, Buyer need to clear the customs duty, It’s aftermarket replcement part
Other Part Number: 135 235 335
Package: 1x Charge Pipe Kit for BMW N55
Reference OE/OEM Number: for BMW N55
Size: Throttle body matched 3\
Type: Charge Pipe
Feature: ESCP
EAN: 6941689852969

Tuning Competition Intercooler For BMW X5 E70 LCI 30dX / 35iX 40dX / 40iX 09-13

March 18, 2023tuning09-13, 30dx, 35ix, 40dx, 40ix, competition, intercooler, tuningadmin

Fuel Supply & Treatment. Intake & Exhaust System. Tuning Competition Intercooler For BMW X5 E70 LCI 30dX / 35iX 40dX / 40iX 09-13. Competition Intercooler Kit for BMW X5 or X6 models of E-series and F-series. The BMW Competition Intercooler Kit EVO III has the following core dimensions (535mm x 332mm x 150mm / stepped, 19,2L). The high performance intercooler core provides a 113,5% larger frontal area and 120% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the end-tank design to remove any OEM bottlenecks. We use our award winning Competition Intercooler Core which is made specifically for this application. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum end-tanks optimized by CFD for best possible internal airflow. The original charge air hoses can still be used. The result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Include : 1Pcs Intercooler same as on the picture. Doesn’t come with installation instructions. As you may know these are after market parts. We recommend professional installation Only. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays). This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “au2parts2014″ and is located in this country: CN. This item can be shipped worldwide.

Features: Individual
Reference OE/OEM Number: For BMW X5 E70 LCI 30dX / 35iX 40dX / 40iX 09-13
Fuel Type: petrol
Country/Region of Manufacture: China
Manufacturer Part Number: 03CSI075ASL
Brand: Unbranded
Type: Turbo Intercooler Kit
Items Included: Itercooler

T3/T4 T3 T4 T04E Universal Turbo Kit With Wastegate Intercooler Pipe BOV Oil line

March 14, 2023t3t4intercooler, line, pipe, t04e, t3t4, turbo, universal, wastegateadmin

T3/T4 T3 T4 T04E Universal Turbo Kit W/ Wastegate Intercooler Pipe BOV Oil line. Universal Turbo Kit Perfect For 1.5L-3.0L engine This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification and other accessories to complete the Turbo Kit Project). Notice:Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm(2.8″) Compressor Outlet Diameter: 53mm(2″). Bearing Type: Wet Float Bearing Cooling Type:Oil Cooling Thrust Bearing:270 degree Horsepower: Up to 400HP Oil Inlet: 1/8 NPT Turbo Type:Individual Condition: 100% Brand New Accessories: You will get exactly as shown as picture above. Other specification in the kit : 1 x Intercooler: Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size – tube and fin style. Intercooler core size: 2172.5 1 x Universal turbo intercooler piping kit including: 2 x Straight Aluminum Pipe 2 x 45°Aluminum Pipe 2 x 75°Aluminum Pipe 2 x 90°Aluminum Pipe 6 x 2.5″ Straight Silicon Hose (Blue) 2 x 2.5″ 90 Degree Hose (Blue) 16 x 2.5″ Stainless Steel T-Clamp 1 x Type-S Blow Off Valve: 2.5″ Inch Type S/Rs Flange Pipe. 1 x BOV pipe: can install anywhere suitable 1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Gauge: 2 (52mm) Turbo Boost Meter Gauge. 1 x Turbo Boost Controller: 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. 1x 5 Bolt pipe: 2.5 t3/t4 5-bolt stainless steel TIG welded pipe. Package Size: 94x 46 x 45 cm Package Weight: 24600g. 1x Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo pipe 1x Turbo Boost Gauge 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve(Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Manual 1x Brochure 1x Sticker. Turbo charger: Turbine housing: Ductile iron QT450-10 – temperature resistant up to 700? Steel turbine wheel: K418 alloy – high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production and own factory High-Speed oil seal ring and Precision clearance Built for durability and strength Technology Advantage: 100% balancing Test by TURBOTECHNICS VSR3 G3-min-Flow VNT Turbo testing Advanced Actuator Tester/Programmer 2. Intercooler core size:2172.5 cools down the turbocharged air efficiently Lightweight aluminum racing intercooler, Strong TIG welds will support high PSI levels 3. Intercooler piping kit Made of 6061 aluminum Lightweight yet strong aluminum piping High pressure silicone couplers and T-bolt clamps 5. Turbo Oil returen /Feeding line kit Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Blow Off Valve Kit CNC Billet Aluminum Type RS Style Blow off Valve Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Easily adjustable to prevent both permature boost leakage and compressor surge. Fast response One For Low And High Boost Pressure. Performance design produces a powerful and aggressive sound Quality design will not leak under high boost conditions Flanges can be installed at user discretion 7. 38MM Wastegate Most reliable wastegates For competition vehicles. Accurate boost control high quality appearance features Dual port design comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi. 5 Blot Turbo pipe CNC machined surface Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. BOV pipe/Adapter can install anywhere suitable 10. Turbo Boost Gauge Red LED Illuminated Needles. Comes with All the Wiring Necessary for Installation. All Accessories are Included for Installation. Accurately monitor boost pressures from the turbo system Back lit for use at night time. Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Need modifications – Professionals ONLY This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. Other items you might also like. TD04 Turbo for Subaru Impreza WRX GT EJ255 DOHC 2008 2009 2010 Turbocharger. Turbo for TOYOTA 2KD 2KD-FTV Land Cruiser 2.5 ct16 turbocharger 2001 2002 2003. Universal Turbocharger GT45 GT42 T4 A/R. 66 1.05 V-band for all 4.0L-6.0L. CT26 Turbo fit for Toyota Coaster LandCruiser 4.2L 1HDT 1720117010 Turbocharger. Turbocharger CHRA Cartridge GTA17V 713672 038253019C for Volkswagen/ Audi/ Skoda. Turbo Turbolader for Mitsubishi Express L300 Pajero Shogun Delica Triton 2.5L. GT1549V Turbo for BMW 320D Touring E46 100KW 136HP 700447 turbocharger + gaskeet. Turbocharger for LandRover Defender 2.4DCI 140hp with electronic actuator. K0422-582 Turbocharger for Mazda CX7 CX-7 2.3L K04 Turbo 2010 2011 2012 2013. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I pick it up at the warehouse? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts. Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc. MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel. This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “maxpeedingrodsgb” and is located in this country: GB. This item can be shipped to United Kingdom.

Application: for 2.5L to 3.5L any 4/6 cylinder engine up to 400+ HP
Brand: maXpeedingrods
Bundle Listing: Yes
Compressor A/R: 0.5
Exhaust Inlet (Turbo Manifold) Flange: T3/T4 Flange
Exhaust Outlet Flange: 5 Bolt Turbo
Finish: Matte
Fuel Type: Universal Application
Horse Power: Capable of Boosting Horse Power up to 500HP
Intercooler: 27” x 7” x 2.5” inch, Inlet size: 2.5 inch
Items Included: Adapter, Clamps, Hoses, T-Bolts
Manufacturer Part Number: YGEBS7
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: @#It’s aftermarket replcement part@#
Package Include: 1x T3/T4 Turbocharger, 1x Oil Feed Line, 1x Oil Return Line, 1x 35/38mm Wastegate, 1x 5 Bolts Turbo exhaust pipe, 1x Turbo Boost Gauge, 1x Turbo Intercooler, 1x Tubo Boost Controller, 1x Type-S Blow Off Valve, 1x BOV Adapter( random color), 1x Turbo Piping Kit
Package Size: 94x 46 x 45 cm
Package Weight: 24600g
Reference OE/OEM Number: T3 T4 t04e TURBOCHARGER, TURBO CHARGER turbocharger KIT with, Oil Feed return Lines hoses, 35/38mm Wastegate, 5 Bolt Turbo exhaust pipe, Turbo Boost Gauge, Turbo Intercooler, Boost Controller, Type-S Blow Off Valve ( random color), BOV Adapter and gaskets, Piping pipes Kit
Turbine A/R: 0.63
Turbo Cooling Type: Oil Cooled
turbo intercooler piping kit: 2 x Straight Aluminum Pipe, 2 x 45°Aluminum Pipe, 2 x 75°Aluminum Pipe, 2 x 90°Aluminum Pipe, 6 x 2.5” Straight Silicon Hose (Blue), 2 x 2.5” 90 Degree Hose (Blue), 16 x 2.5” Stainless Steel T-Clamp
Type: Turbocharger
Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style BOV,, 2.5\
Universal Fitment: Yes
Wastegate: 35/38mm External Waste Gate Kit
Feature: ESCP
EAN: 6931823981037

T3/T4 V-Band Turbo + 27x7x2.5 2.5 Intercooler Tube Piping Kit Universal

March 13, 2023t3t427x7x25, intercooler, piping, t3t4, tube, turbo, universal, v-bandadmin

Easy Return Quick, Simple. Guaranteed Fitment Always the correct part. This is universal application turbo, so modification might be required for some vehicles. Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines. T04E Turbocharger with Internal Wastegate. Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust Outlet Flange: V-Band Flange (ID/OD: 2.5″/3.1″) Intake Inlet/ Outlet: 3.00″/ 2.00″. Turbine Side: Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust outlet : 79mm Turbine exhaust inlet: 44.7mm (length) /85.8mm (width). Compressor Side: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet:78 mm Compressor inlet:51.5 mm. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate: w/ Wastegate Thrust Bearings: 270 Degrees Hosepower: Up to 420 HP. 2.5 Universal Aluminum Intercooler Pipe. Made out of high quality of 6061 aluminum Manual polishing finished -Manufactured from high quality aluminum for durable use: -Straight Layout and Appropriate Pipes’ Radius lead to less pressure loss -High Pressure Resistant Hoses bring out high performance of intercooler -All pipes are well externally polished -All intercoolers are bar & plate design for better cooling efficiency -Professional Installation Is Highly Recommended -Pipe Thickness: 1.8mm -Pipe length: 18. 27x7x2.5 2.5 Universal Intercooler. Inlet/outlet size: 2.5″ -Core size: 21″x 7″x 2.5″ -Full size: 27.00″ (L) X 7.00″ (H) X 2.50(W) -Compress Air Flow Rate. 1x T04E V-Band Turbocharger 1x 27x7x2.5 2.5″ Universal Intercooler 2x 90 Degree Aluminum Pipe 2.5″ 2x Straight aluminum pipe 2.5″ 2x 135 Degree Aluminum Pipe×2 2.5″ 2x U Aluminum Pipe×2 2.5″ 6x Straight Silicon Hose 2.5″ (Blue) 2x 90 Degree Silicone Hose×2 2.5″(Blue) 16x Clamps 2.5″. Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. Then, he updated result will be informed. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. What do I do if I have not received my order? OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Turbine for VW T5 Transporter 2.5 TDI AXD Turbocharger 130 HP 96kw 729325. Turbo Chra Cartridge For Bmw 520 D (e60/e61/e60n/e61n) 2005-07 120/163 762965-4. Turbo Chra Cartridge for BMW X3 2.0 d (E83 / E83N) From 2001 7794140D 717478-1. Turbocharger For Toyota Landcruiser Land Cruiser 4-Runner 2.4l 2l-t 90 D Turbo. T3/T4 T04E TURBO UNIVERSAL T3 FLANGE 5-BOLT EXHAUST OUTLET FLANGE TURBOCHARGER. 66 A/R Com 1.05 A/R V-band Turbo Turbocharger 600+ boost. Turbo WITH GASKET for Toyota Hiace Hilux Surf Land Cruiser 2.5L CT9 1720130120. Turbo 059145701D 454135 for Audi A4 2.5TDI 059145701G 110 Kw 150hp turbocharger. BV43 Street Turbocharger for HYUNDAI H-1 STAREX 2.5 I800 16V 170HP Billet Wheel. TD025 Turbo Chra Cartridge for Hyundai Matrix 1.5L CRTD D3EA 01-05 4917302620. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “driveyoucrazyparts” and is located in this country: GB. This item can be shipped worldwide.

Application: Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines
Boost PSI: 0.5bar – 1bar ( 7.3psi – 14.5psi )
Brand: BFO
Compressor A/R: 0.5
Cooling type:: Oil cooled
Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
Exhaust Outlet Flange: V-Band Flange
Fitment Type: Direct Replacement
Manufacturer Part Number: JBOAVN
Manufacturer Warranty: 2 Years
Placement on Vehicle: Front
Reference OE/OEM Number: T3 T04E UPGRADE TURBO CHARGER TURBINE, with 27x7x2.5 intercooler, 2.5 inch intercooler pipe, universal turbocharger kit, exhaust gas turbine kit
Superseded Part Number: Front Mount Intercooler/Inter cooler
Turbine A/R: 0.63
Type: Turbo Charger
Universal Fitment: Yes
Feature: ESCP

T04E T3/T4 A/R 0.63 400+HP TURBO Oil Line 2.5 Intercooler Piping Pipe Kits

March 4, 2023t04e400hp, intercooler, kits, line, pipe, piping, t04e, t3t4, turboadmin

T04E T3/T4 A/R 0.63 400+HP TURBO Oil Line 2.5 Intercooler Piping Pipe Kits. This item fits: Universal Application for 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP Maximum 18PSI (1.2Bar). Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooled Wastegate: W/O Wastegate. Oil Inlet: M121.25 Oil Outlet: 2M81.25. Compressor: Trim: 48.1 A/R: 0.5 Inducer: 52.7 Exducer: 76 ———————- Turbine: Trim: 74.2 A/R: 0.63 Inducer: 64.8 Exducer: 55.8. Oil return line length: 550mm. Oil return line inner diameter: ¢21. Oil feed line length: 1000mm. Oil feed line inner diameter: ¢14. Hose end fitting: 10 AN. Material: High Strength Steel with Aluminum Material. Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture. Inlet / outlet size : 2.5. Core size : 21”x 7”x 2.25”/550x175x64mm. Full size: 27.00″ (L) X 7.00″ (H) X 2.50(W). Compress Air Flow Rate. Pressure drop: 25psiat35psi, 0.20.5psiat15psi. Core design: Tube & Fin. Intercooler Piping Pipe Kit Information. Pipe Thickness: 1.8mm. 2x 90 Degree Aluminum Pipe 2.5″ 2x Straight aluminum pipe 2.5″ 2x 135 Degree Aluminum Pipe×2 2.5″ 2x U Aluminum Pipe×2 2.5″ 6x Straight Silicon Hose 2.5″ (Blue) 2x 90 Degree Silicone Hose×2 2.5″(Blue) 16x Clamps 2.5. 100% Brand New Professional Installation is Highly Recommended, Instruction is NOT Included Additional parts will be needed for a complete installation. Please consult professional turbo installer for details. Does NOT have a internal wastegate so you must have a external wastegate on your manifold. Other items you might also like. T25 T28 Turbo GT25 GT28 GT2871 GT2860 Turbocharger with actuator wastegate. T3 T4 T04E Universal Turbo Turbocharger 400HP. R for 1.5L – 2.5L 400+ HP. Turbo Cartridge for Peugeot Partner 66KW 307 406 Citroen Picasso C5 Xsara new. Turbocharger Turbolader for BMW X5 3.0L 3.0d E53 GT2260V M57 TU 160KW 218ps. Universal GT45 GT45R Turbo T4 A/R. 66 A/R 1.05 V-band Turbocharger 4.0L-6.0L. TD02 Turbo Chra Cartridge for Hyundai Getz 1.5L CRTD D3EA 03-08 4917302622. Turbo for Nissan Skyline R32 R34 2.0L 2.5L RB20DET RB25DET Turbocharger a. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I pick it up at the warehouse? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts. Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc. MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel. This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “maxpeedingrodsgb” and is located in this country: GB. This item can be shipped worldwide.

Bearing Type: Floating Bearing
Brand: maXpeedingrods
Bundle Listing: yes
Compressor A/R: 0.5
Compressor Inducer /Exducer (MM): 52.7 / 76
Compressor Trim: 44
Cooling type: Oil cooled
Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
Exhaust Outlet Flange: Standard T3 5-Bolt
Fitment Type: Direct Replacement
Inlet / Outlet Diameter: 3
Intake Inlet/ Outlet: 3
Interchange Part Number: T3, T4, T04E
intercooler Core size: 21”x 7”x 2.25”/550x175x64mm
intercooler Full size: 27.00\
intercooler inlet/outlet: 2.5\
Intercooler Material: Aluminum alloy, 21”x 7”x 2.25”/550x175x64mm
Manufacturer Part Number: 6TQHUG
Manufacturer Warranty: 2 Years
Materials: Cast Iron/Steel Turbo Housing/ Aluminum Controller
Note2: This is universal application turbo,, so modification might be required for some vehicles
OIL FEED LINE: Length: 1000mm, Inner Diameter: 14mm
Oil Inlet: M12*1.25
Oil Outlet: 2*M8*1.25
Oil Return Line Length: Length: 550mm, Inner Diameter: 21mm
Placement on Vehicle: Front
Reference OE/OEM Number: for 1.5L -2.5L any 4/6 cylinder engine up to 400+ HP, Turbo,Turbocharger,Turbo Charger, Turbolader, Intercooler Piping Pipe Kit,, Oil Fuel Feed Returned Line
Turbine A/R: 0.63
Turbine Inducer / Exducer (mm): 64.8 / 55.8
Turbine Trim: 73
Type: Turbocharger
Universal Fitment: Yes
Feature: ESCP

T3 T4 Turbo Charger 0.63 A/R + Intercooler + 2.5 Intercooler Tube Piping Kit

February 25, 2023turbocharger, intercooler, piping, tube, turboadmin

Kp35-011 kp35-033 Turbocharger for Renault Modus dCi 68HP 1.5 D K9K768 engine. Turbocharger for Mitsubishi Pajero Shogun Delica 2.8L TD04-12T Oil Turbo New. Turbo Charger Cartridge for Seat Ibiza III 1.8 T Cupra 1.8 L BKV, BJX, BBU, BLZ new. T3 T4 Turbo Charger 0.63 A/R + Intercooler + 2.5 Intercooler Tube Piping Kit. We know our products. Always the correct part. This is universal application turbo, so modification might be required for some vehicles. Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines. T04E Turbocharger with Internal Wastegate. Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust Outlet Flange: V-Band Flange (ID/OD: 2.5″/3.1″) Intake Inlet/ Outlet: 3.00″/ 2.00″. Turbine Side: Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust outlet : 79mm Turbine exhaust inlet: 44.7mm (length) /85.8mm (width). Compressor Side: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet:78 mm Compressor inlet:51.5 mm. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate: w/ Wastegate Thrust Bearings: 270 Degrees Hosepower: Up to 420 HP. 2.5 Universal Aluminum Intercooler Pipe. Made out of high quality of 6061 aluminum Manual polishing finished -Manufactured from high quality aluminum for durable use: -Straight Layout and Appropriate Pipes’ Radius lead to less pressure loss -High Pressure Resistant Hoses bring out high performance of intercooler -All pipes are well externally polished -All intercoolers are bar & plate design for better cooling efficiency -Professional Installation Is Highly Recommended -Pipe Thickness: 1.8mm -Pipe length: 18. 27x7x2.5 2.5 Universal Intercooler. Inlet/outlet size: 2.5″ -Core size: 21″x 7″x 2.5″ -Full size: 27.00″ (L) X 7.00″ (H) X 2.50(W) -Compress Air Flow Rate. 1x T04E V-Band Turbocharger 1x 27x7x2.5 2.5″ Universal Intercooler 2x 90 Degree Aluminum Pipe 2.5″ 2x Straight aluminum pipe 2.5″ 2x 135 Degree Aluminum Pipe×2 2.5″ 2x U Aluminum Pipe×2 2.5″ 6x Straight Silicon Hose 2.5″ (Blue) 2x 90 Degree Silicone Hose×2 2.5″(Blue) 16x Clamps 2.5″. Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Will this fit my car? When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Other items you might also like. Turbo Chra for Ford TRANSIT IV MK 4 2.5TD FT190 4HC/4GD Cartridge K04-0006. Turbo Cartridge for Toyota 2KD-FTV Hilux Hiace Innova Diesel 2.5L d4d CT16 new. Universal Turbo Turbocharger T3 T4 T04E trim 74.2 V-band Oil cool for 2.0-2.5L. New Turbo Chra Core For Jeep Cherokee 218 160 3.0CRD OM642 Euro 4 6420900780. Billet Wheel VNT turbo charger for Nissan Navara D40 Pathfinder 2.5 L 769708. Gt1549p Chra for Peugeot 607 2.2 HDI- 98KW 2001 – Turbocharger Core 71723516. Every message will be replied within 12 hours on 7×24 hours. 7×24 hours, always here for you. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “excellenttuningsuspension” and is located in this country: HK. This item can be shipped worldwide.

Application: Perfect for all 4 or 6 CYL, 1.5L to 2.5L engines
Boost PSI: 0.5bar – 1bar ( 7.3psi – 14.5psi )
Brand: BFO
Compressor A/R: 0.5
Cooling type:: Oil cooled
Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt
Exhaust Outlet Flange: V-Band Flange
Fitment Type: Direct Replacement
Manufacturer Part Number: ZBF2S5
Manufacturer Warranty: 2 Years
Placement on Vehicle: Front
Reference OE/OEM Number: T3 T04E UPGRADE TURBO CHARGER TURBINE, with 27x7x2.5 intercooler, 2.5 inch intercooler pipe, universal turbocharger kit, exhaust gas turbine kit
Superseded Part Number: Front Mount Intercooler/Inter cooler
Turbine A/R: 0.63
Type: Turbo Charger
Universal Fitment: Yes
Feature: ESCP

T04E Universal Turbo Kit T3 flange Universal Intercooler piping Type-S BOV

February 6, 2023t04eflange, intercooler, piping, t04e, turbo, type-s, universaladmin

We know our products. Always the correct part. T04E Universal Turbo Kit T3 flange Universal Intercooler piping Type-S BOV. Universal Turbo Kit Perfect for 1.5L-3.0L engine, 4/6 cylinder This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification and other accessories to complete the Turbo Kit Project). Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm(2.8″) Compressor Outlet Diameter: 53mm(2″). Bearing Type: Wet Float Bearing Cooling Type: Oil Cooling Thrust Bearing: 270 degree Horsepower: Up to 400HP Oil Inlet: 1/8 NPT Turbo Type: Individual Condition: 100% Brand New Accessories: You will get exactly as shown as picture above. Other specification in the kit : 1 x Intercooler: Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size – tube and fin style. Intercooler core size: 2172.5 1 x Universal turbo intercooler piping kit including: 2 x Straight Aluminum Pipe 2 x 45°Aluminum Pipe 2 x 75°Aluminum Pipe 2 x 90°Aluminum Pipe 6 x 2.5″ Straight Silicon Hose (Blue) 2 x 2.5″ 90 Degree Hose (Blue) 16 x 2.5″ Stainless Steel T-Clamp 1 x Type-S Blow Off Valve: 2.5″ Inch Type S/Rs Flange Pipe. 1 x BOV pipe: can install anywhere suitable 1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Gauge: 2 (52mm) Turbo Boost Meter Gauge. 1 x Turbo Boost Controller: 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. 1x 5 Bolt pipe: 2.5 t3/t4 5-bolt stainless steel TIG welded pipe. Package Size: 94x 46 x 45 cm Package Weight: 24600g. Turbo charger: Turbine housing: Ductile iron QT450-10 – temperature resistant up to 700? Steel turbine wheel: K418 alloy – high oxidation stability and resistance up to 900? Compressor housing: ZL104 aluminum with lightweight Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production and own factory High-Speed oil seal ring and Precision clearance Built for durability and strength Technology Advantage: 100% balancing Test by TURBOTECHNICS VSR3 G3-min-Flow VNT Turbo testing Advanced Actuator Tester/Programmer. Intercooler core size:2172.5 cools down the turbocharged air efficiently Lightweight aluminum racing intercooler, Strong TIG welds will support high PSI levels. Intercooler piping kit Made of 6061 aluminum Lightweight yet strong aluminum piping High pressure silicone couplers and T-bolt clamps 5. Turbo Oil returen /Feeding line kit Stainless Steel Braided Includes complete install kit It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look gives a best cooling performance on your turbo and long lasting life. Blow Off Valve Kit CNC Billet Aluminum Type RS Style Blow off Valve Easy Mount Piping Set Included For Bolt-On. Including all necessary hardwares. Easily adjustable to prevent both permature boost leakage and compressor surge. Fast response One For Low And High Boost Pressure. Performance design produces a powerful and aggressive sound Quality design will not leak under high boost conditions Flanges can be installed at user discretion. 38MM Wastegate Most reliable wastegates For competition vehicles. Accurate boost control high quality appearance features Dual port design comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi. 5 Blot Turbo pipe CNC machined surface Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. BOV pipe/Adapter can install anywhere suitable. Turbo Boost Gauge Red LED Illuminated Needles. Comes with All the Wiring Necessary for Installation. All Accessories are Included for Installation. Accurately monitor boost pressures from the turbo system Back lit for use at night time. 1x Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo pipe 1x Turbo Boost Gauge 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve(Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit (You will get exactly as shown in the picture). Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Need modifications – Professionals ONLY This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. Other items you might also like. Turbo cartridge core CHRA for Mercedes-Benz S 320 CDI W221 235 HP 765155-7. Exhaust TURBO TURBOCHARGER for CITROEN C3 C4 PICASSO 1.6 HDi 90BHP TD02 type. K03 053 k03-058 Turbocharger FOR AUDI A3 TT A4 1.8T AUM AVJ engines w/ gasket. GT1749V Turbo Chra Cartridge for BMW X3 2.0 d (E83 / E83N) 7794140D 717478. Left TD04 Turbocharger for Mitsubishi GT3000 Dodge Stealth 6G72 V6 3.0L 1992. Turbocharger for Mitsubishi Pajero Shogun MK II Delica 2.8L TD04-12T Oil Turbo. Universal GT45 GT42 T4 A/R. 66 1.05 V-band Twin-Scroll Turbo Turbocharger 600+HP. GT1446V Billet Wheel Turbo charger for Vauxhall Opel Mocca Astra J 1.4 781504. Turbocharger For Ford Transit Bus 63KW 85 PS 2.2 TDCI Supercharger w/ gaskets. Turbo for BMW e53 3.0D E53 160kw 753392-1 7791046M09 M57N Turbocharger. Will this fit my car? When will my order be dispatched? What do I do if I have not received my order? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. The message response might be delayed on Weekend, but we promise a response within 12 hours. Opening Hours:7 x 24. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “carsloyalpartner” and is located in this country: GB. This item can be shipped to United Kingdom.

Application: Universal Turbo Kit Perfect for 1.5L-3.0L engine, 4/6 cylinder
Brand: maXpeedingrods
Bundle Listing: Yes
Compressor A/R: 0.5
Exhaust Inlet (Turbo Manifold) Flange: T3/T4 Flange
Exhaust Outlet Flange: 5 Bolt Turbo
Finish: Matte
Fuel Type: Universal Application
Horse Power: This Kit Will be able to add 350+HP at 7.5-14.5 PSI.
Interchange Part Number: T3 T4 T04E UNIVERSAL TURBO CHARGER TURBOCHARGER
Intercooler: 27” x 7” x 2.5” inch, Inlet size: 2.5 inch
Items Included: Adapter, Clamps, Hoses, T-Bolts
Manufacturer Part Number: JR5CZO
Manufacturer Warranty: 2 Years
Note: No Instruction Included
Notice: @#It’s aftermarket replcement part@#
Package Include: 1x T3/T4 Turbocharger, 1x Oil Feed Line, 1x Oil Return Line, 1x 35/38mm Wastegate, 1x 5 Bolts Turbo exhaust pipe, 1x Turbo Boost Gauge, 1x Turbo Intercooler, 1x Tubo Boost Controller, 1x Type-S Blow Off Valve, 1x BOV Adapter( random color), 1x Turbo Piping Kit
Reference OE/OEM Number: T3 T4 t04e TURBOCHARGER, TURBO CHARGER turbocharger KIT with, Oil Feed return Lines hoses, 35/38mm Wastegate, 5 Bolt Turbo exhaust pipe, Turbo Boost Gauge, Turbo Intercooler, Boost Controller, Type-S Blow Off Valve ( random color), BOV Adapter and gaskets, Piping pipes Kit
Turbine A/R: 0.63
Turbo Cooling Type: Oil Cooled
turbo intercooler piping kit: 2 x Straight Aluminum Pipe, 2 x 45°Aluminum Pipe, 2 x 75°Aluminum Pipe, 2 x 90°Aluminum Pipe, 6 x 2.5” Straight Silicon Hose (Blue), 2 x 2.5” 90 Degree Hose (Blue), 16 x 2.5” Stainless Steel T-Clamp
Type: Turbocharger
Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style BOV,, 2.5\
Universal Fitment: Yes
Wastegate: 35/38mm External Waste Gate Kit
EAN: 6941324413029

2.5 63mm Universal 8 PCS Turbo Intercooler Pipe Kit + Silicone Hose Clamps Red

February 5, 202363mm63mm, clamps, hose, intercooler, pipe, silicone, turbo, universaladmin

Fuel Supply & Treatment. Intake & Exhaust System. 2.5 63mm Universal 8 PCS Turbo Intercooler Pipe Kit + Silicone Hose Clamps Red. 2.5 63mm Universal 8PCS Turbo Intercooler Pipe Piping+ Silicone Hose T-Clamp Kit. 2.5 Aluminum Piping includes. 90 degrees pipes X2. 45 degrees pipes X2. 180 degrees U-bent pipes X2. 2.5 Silicone hose x 8. T- Clamps x 16. Pipe Thickness: 1.8 mm. Pip length:17.7. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays). This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “au2parts2014″ and is located in this country: CN. This item can be shipped worldwide.

Features: Individual
Reference OE/OEM Number: Universal
Country/Region of Manufacture: China
Colour: Red
Finish: Polished
Classic Part: Yes
Manufacturer Part Number: 03CSG003ARD
Brand: Unbranded/Generic
Type: Turbocharger Up Pipe
Items Included: Hoses
Universal Fitment: Yes
EAN: 843401104669

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31