Tag Archives: 420i

Charge Pipe Kit Intercooler Turbo For BMW G20 G22 G28 Z4 B48 320i 330i 420i 430

October 26, 2024charge320i, 330i, 420i, charge, intercooler, pipe, turboadmin

Fuel Supply & Treatment. Intake & Exhaust System. Intercooler Intake Turbo Charge Pipe Kit for BMW 3-Series G20 G21 G22 320i 325i 330i B48 2019+; 4-Series G22 G23 420i 425i 430i B48 2021+; G28 Z4 B48 2020+. For BMW 3-Series G20 G21/G22 320i 325i 330i B48 2019+. For BMW 4-Series G22 G23 420i 425i 430i B48 2021+. For BMW G28 Z4 B48 2020+. Intercooler Pipe Kit turbocharged models is great way to improve throttle response, reduce turbo lag and maximize power potential. The increased piping size helps to reduce turbulence and maximize flow into the engine. Doesn’t come with installation instructions. We recommend professional installation Only. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

MMR Charge Pipe Kit BMW 320i, 328i, 420i, 428i, 125i Manual F-Series N20 Turbo

October 24, 2024charge125i, 320i, 328i, 420i, 428i, charge, f-series, manual, pipe, turboadmin

MMR Charge Pipe Kit – BMW 320i, 328i, 420i, 428i, 125i Manual F-Series N20 Turbo. The MMR High-Flow Charge Pipe Kit will improve performance, reliability and even aesthetics of your 2.0 turbocharged 4-cylinder N20-powered BMW F2x or F3x. With increased boost pressure the standard pipework is prone to splitting or cracking – the MMR aluminium replacements ensure reliability, even at significantly increased power outputs. With increased boost pressure the N20’s cheap standard plastic pipework can be prone to splitting or cracking – it’s more a question of’if’ than’when’ you’ll experience boost leaks. By fitting the MMR lightweight aluminium replacement Charge Pipes you can be assured of reliability even at significantly increased power outputs. The smooth bore mandrel-bent pipework has been CFD-optimised to ensure greatly improved airflow versus the OE setup. The rigid pipes also prevent any deformation of the pipes under load or vacuum, another problem that the OE pipes can suffer from. This focus on ensuring smooth flow ensures that the MMR charge pipes will not only improve reliability, but also improve throttle response and ultimately, power output. Finished in a durable crinkle black finish, contrasted by laser-etched MMR logo detailing, the MMR charge pipes look just as good as they fit and perform, and are an easy fit, direct-replacement for the OE pipework. As an added nice detail, the hard pipes also feature a handy 1/8 bung for the easy addition of either methanol, or water injection. The MMR High-Flow Charge Pipe kit includes all you need for installation: three high-flow aluminium charge pipes with CNC leak-free connections, four silicone coupler hose, c-clip and required jubilee clips. WHAT’S IN THE BOX? Three high-flow aluminium charge pipes with CNC leak-free connections. Four silicone coupler hoses. If there will be any delays in your order you will be informed within 24-48 hours. Image for illustration purposes only. Distributed By Haz Motorsport.

EBC Brakes Turbo Groove Front Discs and Greenstuff Pads Kit For BMW F32 420i

October 23, 2024brakes420i, brakes, discs, front, greenstuff, groove, pads, turboadmin

Shop All Categories. EBC Brakes Turbo Groove Front Discs and Greenstuff Pads Kit For BMW F32 420i. An EBC Brakes Turbo Groove Brake Discs and Greenstuff Pads Kit is a great value brake upgrade. Combining EBC Turbo Groove Brake Discs with their Greenstuff fast-road pad compound. This combination will give you an uprated pad/disc compound, perfect for fast-road use on lighter cars or moderate fast-road use on midweight cars. 15% improvement over stock pads. Now you can get a complete set of EBC Brakes Turbo Groove Brake Discs and Greenstuff Pads Kit to fit your vehicle. This kit will save a significant amount compared to purchasing the same items separately. EBC Brakes Greenstuff Performance pads are suitable for general road and fast road use on lighter vehicles of up to approx 200bhp. They offer good braking performance even after repeated applications of your brakes. The softer pad compound is optimised for lighter hot hatches and sports saloons to give an excellent pedal feel, is not overly hard on discs, has a chamfered edge profile and comes supplied with shims for noise reduction. EBC Brakes Turbo Groove Brake Discs are made from high quality cast iron and have a grooved and dimpled face. Grooved brake discs sweep the surface of the pad clean as you brake. This helps prevent the build-up of hot gasses between the pad and the disc, which can negatively impact the performance of the pad. Always having a clean pad surface helps keep stopping power at it’s best. The dimples help hot gas escape, without the noise and the cracking issues associated with drilled brake discs. Note: EBC do not recommend this pad compound for any kind of track driving. 16.07.2024, 07:00:07. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. That means no additional charges or surprises when your item arrives. If your parcel is lost or damaged along the way, the GSP protections and policies will cover you. CAN I CHANGE MY ADDRESS ONCE I’VE PLACED MY ORDER? I’VE ADDED A NOTE TO MY ORDER, CAN YOU VIEW IT? As you may require it in the event of a claim with your carrier. Monday – Friday: 8.30am – 5.00pm. Saturday & Sunday: CLOSED. Also, during periods of high demand, there may be additional delays in us responding.

MTC MOTORSPORT BMW G22 G23 420i 425i 430i TURBO FRONT MOUNT INTERCOOLER KIT

October 3, 2024motorsport420i, 425i, 430i, front, intercooler, motorsport, mount, turboadmin

MTC Motorsport BMW B48 G chassis Front Mount Intercooler kit with Charge Pipes. We have engineered this intercooler with a bar and plate core. The MTC intercooler features a massive bar and plate core with flowed cast end tanks and a huge increase the surface area. This intercooler weighs around 10kg and provides over 100% more volume and near 100% more surface area than the standard intercooler. Proven to handle 600bhp. Finished powder coated in black. We have tested our intercoolers on a few vehicles and found they have absolutely fantastic results. The IAT compared to the standard intercooler are reduced massively which means you get consistent increased performance. The standard intercooler and the MTC intercooler both had intercooler intake temperatures of between 135-140 degrees through 10 runs on the road. At the other side of the intercooler into the engine the standard intercooler temperatures were between 66-70 degrees whereas the MTC intercooler temperatures were around 25 degrees over all 10 runs and was proven to be fantastic on track. The intercooler is a direct fit however professional installation is recommended and should take approximately 2-3 hours. The intercooler will fit plug and play with the following vehicles. BMW G20 G21 320 325 330 B48. BMW G22 G23 420 425 430 B48. BMW G28 Z4 B48.

Intercooler Turbo Charge Pipe For BMW G20 G22 G28 Z4 B48 320i 325i 420i 430i G28

August 11, 2024intercooler320i, 325i, 420i, 430i, charge, intercooler, pipe, turboadmin

Intercooler Intake Turbo Charge Pipe Kit for BMW 3-Series G20 G21 G22 320i 325i 330i B48 2019+; 4-Series G22 G23 420i 425i 430i B48 2021+; G28 Z4 B48 2020+. For BMW 3-Series G20 G21/G22 320i 325i 330i B48 2019+. For BMW 4-Series G22 G23 420i 425i 430i B48 2021+. For BMW G28 Z4 B48 2020+. Intercooler Pipe Kit turbocharged models is great way to improve throttle response, reduce turbo lag and maximize power potential. The increased piping size helps to reduce turbulence and maximize flow into the engine. Doesn’t come with installation instructions. We recommend professional installation Only. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

MMR Charge Pipe Kit BMW 320i, 328i, 420i, 428i, 125i Auto F-Series N20 Turbo

July 24, 2024charge125i, 320i, 328i, 420i, 428i, auto, charge, f-series, pipe, turboadmin

MMR Charge Pipe Kit – BMW 320i, 328i, 420i, 428i, 125i Auto F-Series N20 Turbo. The MMR High-Flow Charge Pipe Kit will improve performance, reliability and even aesthetics of your 2.0 turbocharged 4-cylinder N20-powered BMW F2x or F3x. With increased boost pressure the standard pipework is prone to splitting or cracking – the MMR aluminium replacements ensure reliability, even at significantly increased power outputs. With increased boost pressure the N20’s cheap standard plastic pipework can be prone to splitting or cracking – it’s more a question of’if’ than’when’ you’ll experience boost leaks. By fitting the MMR lightweight aluminium replacement Charge Pipes you can be assured of reliability even at significantly increased power outputs. The smooth bore mandrel-bent pipework has been CFD-optimised to ensure greatly improved airflow versus the OE setup. The rigid pipes also prevent any deformation of the pipes under load or vacuum, another problem that the OE pipes can suffer from. This focus on ensuring smooth flow ensures that the MMR charge pipes will not only improve reliability, but also improve throttle response and ultimately, power output. Finished in a durable crinkle black finish, contrasted by laser-etched MMR logo detailing, the MMR charge pipes look just as good as they fit and perform, and are an easy fit, direct-replacement for the OE pipework. As an added nice detail, the hard pipes also feature a handy 1/8 bung for the easy addition of either methanol, or water injection. The MMR High-Flow Charge Pipe kit includes all you need for installation: three high-flow aluminium charge pipes with CNC leak-free connections, four silicone coupler hose, c-clip and required jubilee clips. WHAT’S IN THE BOX? Three high-flow aluminium charge pipes with CNC leak-free connections. Four silicone coupler hoses. IMPORTANT NOTE REGARDING – STOCK LEVELS. The available item quantity is correct at the time of uploading this listing. This product may have multiple listings due to application of other suitable vehicles which affect stock levels. If there will be any delays in your order you will be informed within 24-48 hours. Image for illustration purposes only. Distributed By Haz Motorsport.

Front Intercooler Kit for BMW 128i 228i 320i 328i 420i 428i N20 N26 Turbo

July 23, 2024front128i, 228i, 320i, 328i, 420i, 428i, front, intercooler, turboadmin

Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks Anti corrosion protective coating Charge Pipe Boost Pipe Kit Increase throttle response and decreases turbo lag. Retains factory style o-ring throttle body lock flange. Compatible with the factory electronic diverter valve. Note: Doesn’t come with installation instructions We recommend professional installation Only. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. A lot less pressure drop than stock intercooler. Maximum cooling performance with clearly more power. Anti corrosion protective coating with perfect thermal heat dissapating character. Charge Pipe Boost Pipe Kit Increase throttle response and decreases turbo lag. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick and easy connection and disconnection to throttle body. Precision CNC machined MAP sensor flange ensures leak free connection. Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping. Your Full and Correct Address, Postcode(Make sure address is correct and we sent the goods only by the eaby address). Our logistics department cannot deliver your orders during weekends / holidays / office closed hours or at special timing. Import Duty & Other Charges. It will surely help us in better serviceability and would also assist us in improving our business standards. We assure you of resolving it in the best possible way. China Beijing time (GMT+8.0). Monday to Friday only(excluding Holidays).

MST Performance Intake Induction Kit for BMW 420i (F32) 2.0 Turbo N20 Engine

July 18, 2024performance420i, engine, induction, intake, performance, turboadmin

MST Performance Intake Induction Kit for BMW 420i (F32) 2.0 Turbo N20 Engine. Wysylka poprzez Yodel Store to Door.

Front Intercooler EVO II Kit for BMW 128i 228i 320i 328i 420i 428i N20 N26 Turbo

July 17, 2024front128i, 228i, 320i, 328i, 420i, 428i, front, intercooler, turboadmin

MST Performance Intake Induction Kit for BMW 420i (F32) 2.0 Turbo N20 Engine

June 21, 2024performance420i, engine, induction, intake, performance, turboadmin

Usually kept on the shelf, can sometimes take 2 – 4 weeks to be made. Please message us if you are urgent! MST-BW-N2001 – Intake Induction Kit for BMW 2.0 Turbo N20 Engine. This is a performance enhancing induction kit for the 2012+ BMW 125i 228i 320i 328i & 428i F22 F30 F32. Black powdercoated heat shield and inlet pipe. Dyno results: max gains 12-14bhp (this may vary dependant on vehicle). Easy to maintain dry pleated filter. Cold air straight to the turbo charger. What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include. Black powdercoated heat shield. Black powdercoated inlet pipe. Full fitting kit with easy step by step instructions.

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31