T04e-T3-t4-A-r-57-400-hp-Stage-III-Turbo-Charger-oil-Feed-drain-Line-Kits-01-hj

T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits

T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits

T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits
57 400+HP STAGE III TURBO CHARGER+OIL FEED+DRAIN LINE KITS. We know our products. Application: This item fits: Universal Application. For 1.5L to 2.5L any 4/6 cylinder engine up to 400+ HP Maximum 18PSI (1.2Bar). Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooled Wastegate: w/o Wastegate Bearing Type: Journal Bearing Compressor: Trim: 48.1 A/R: 0.5 Inducer: 52.7 Exducer: 76 ———————- Turbine: Trim: 74.2 A/R: 0.57 Inducer: 64.8 Exducer: 55.8 ———————- Compressor outlet: 42mm(inside diameter), 52mm(Outer diameter) Compressor inlet: 68 mm(inside diameter), 77mm(Outer diameter). Oil Inlet: M121.25 Oil Outlet: 2M81.25 Trust Bearing: 270 degree Hosepower: Up to 400+HP Turbo Type: Individual Universal Fitment: Yes Finish: Matte. Oil return line length: 550mm. Oil return line inner diameter: ¢21. Oil feed line length: 1000mm. Oil feed line inner diameter: ¢14. Hose end fitting: 10 AN. Material: High Strength Steel with Aluminum Material. Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture. 100% BALANCING TEST, This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. All of the materials we use are the best materials, and we believe that only the best materials will guarantee the life of the turbo. Turbine Wheel: the special K418 alloy to achieve stability under high temperatures up to 900 degrees Celsius, and never use K13 Inconel alloy. Turbine housing : Ductile iron QT450-10 can withstand temperatures up to 700 degrees Celsius Aluminum blades : Precision machining forging. Make sure the oil drain line is lower than the turbo itself. Ensure exhaust outlet are well sealed by welding The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Other items you might also like. Turbo Turbolader Cartridge for Smart Fortwo 0.8 CDI OM660DE08LA 45HP 54HP. Connecting Rods Conrods + ARP Bolts For Fiat Lancia Delta 2.0 16v Turbo 145mm. Turbo charger for Opel Insignia 2.0 A20NHT 220ps 2008 k04-0184 53049700200. Turbo Chra Core for Land Rover Range Rover 2.5 TDI 113HP 300 TDI T25 452055. Turbo Turbocharger for Audi A4 A6 1.8T AEB/ ANB 97 – 99 K03S K03 53039880005. TB250 Turbo Turbocharger for IVECO DAILY 2 2.5 TD 4841844 466974. TURBOCHARGER for Ford Transit / Ranger 153HP-113KW 2.2TDCI 787556 TURBO. K03 Turbo FOR Audi A4 A6 1.8T VW Passat Gti K03 APU ARK AUG Turbocharger. TURBOCHARGER FIT CITROEN PEUGEOT 207 308 C4 EP6CDT 150HP 155HP 156HP. Turbocharger for Hyundai Starex 2.5 CRDi 85kw 2010 2011 2012 2013 2014 2015 BV43. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “heimatderautoteile” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Bearing:: Journal Bearing
  • Brand: BFO
  • Compressor A/R:: 0.5
  • Cooling type:: Oil cooled
  • Exhaust Inlet: T3 T4 4 Bolts Flange
  • Exhaust Outlet: T3 5 bolts
  • Features: Individual
  • Finish: Matte
  • Fit for: for 1.5L to 2.5L  any 4/6 cylinder engine up to 400+ HP
  • Fitment Type: Direct Replacement
  • Hose end fitting: 10 AN
  • Hosepower: up to 400+HP
  • Interchange Part Number: Universal T04E Turbo turbocharger
  • Manufacturer Part Number: AIS4VW
  • Manufacturer Warranty: 2 Years
  • Oil feed line length: 1000mm
  • Oil return line length: 550mm
  • Placement on Vehicle: Front
  • Reference OE/OEM Number: Universal Application, Tubro Kit,T04E,T3/T3, Turbo,Turbocharger,Turbo Charger, Universal Turbo Turbolader , Fuel Oil return feed line
  • Turbine A/R:: 0.57
  • Type: Turbocharger
  • Universal Fitment: Yes
  • Feature: ESCP
  • EAN: 6941689827202

T04e T3/t4 A/r. 57 400+hp Stage III Turbo Charger+oil Feed+drain Line Kits