This is a Turbo kit I was using on my rallycross car and have now gone back to an atmo engine. The AET Turbos supplied Xona X2C turbo is a year old but done no more than 50 competitive miles. It is good for 500bhp, T3 flange. 63 rear housing and has zero play. The exhaust manifold has been welded as you can see where there was a crack appeared. Includes the manifold, turbo, downpipe with boss for Lambda and screamer, boost pipes to intercooler, boost pipes to inlet plenum, alloy inlet plenum with tapping for ACT sensor, Tial dump valve, Tial external wastegate, MAC boost control valve with AN3 pipes and fittings, pair of Catcam turbo cams, 94mm 8.0:1 CR pistons on rods, oil feed AN4 pipe with insulation, AN10 oil drain to sump pipe with insulation, Xtreme 2 plate clutch and flywheel, Spare boost pipes, spare wastegate springs, 980cc Bosch Injectors 0280158040, air inlet pipe and used air filter, 3 bar KMS map sensor. The engine itself is NOT for sale, just the items listed above. This set up gave us 400hp with 12psi boost, have dyno print. Any questions please ask and will try to answer. Would prefer to sell as one lot but may split if enough interest.