We know our products. Always the correct part. Gt30 gt3037 universal turbo with 1m 0.55m oil feed return hoses and fittings. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. GT2052V Turbocharger for Nissan Patrol 3.0L D ZD30DDTI/229 ZD30ETi 1999 – 2005. TURBO CORE CHRA CARTRIDGE GT2056V FOR NAVARA PATHFINDER 2.5 DI YD25 14411EC00B. Turbocharger for Nissan Navara 2.5 133HP 98KW 14411-VK500 VN3 YD25 Turbine. Turbo Charger Fit for Renault Kangoo Scenic Dacia Duster 1.5 dCi 110 BHP, 81 kW. Turbo 54359880015 for Vauxhall Opel Corsa D 1.3 CDTI Z13DTH turbocharger. Turbo Turbocharger for Audi A4 2.0T B7 BUL BWE BWT K03 2005 2007 2008 2009. T3 GT3582 GT35 A/R 0. 63 Turbine Turbo Turbocharger turbocompressor up to 600HP. Turbo fit for Mitsubishi Pajero L200 Express 2.5L 4D56 TD04-09B Oil Turbocharger. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped to United Kingdom.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: 27SJPT
• Manufacturer Warranty: 2 Years
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30, GT3037, GT3076, Turbo Turbocharger Fuel Oil line Kit, TURBO KIT
• Thrust bearing: 270 Degrees
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Type: Turbocharger
• Universal Fitment: Yes
• Feature: ESCP
• EAN: 6941324413401

Incoming search terms:

• bmw gt30 turbo