We know our products. Always the correct part. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. Turbo Chra For Seat LeonAltea Octavia Fabia Superb TDI 105HP 1.9D GGT16V 751851. TURBOCHARGER For Seat Ibiza Toledo MK2 1.9 TDI 160PS 150HP 038253014E. T70 Turbo Turbocharger T3 Flange 0.7 A/R Turbine Oil Drain Return Feed Hose Kit. Turbo for Fiat Ducato Iveco Daily Opel Movano Vivaro Renault Master 2.8L turbine. Turbo Cartridge Core Chra for Nissan Interstar 2.5 dCi ; G9U;100/114 hp 93161963. Turbo Chra Core For Nissan Navara 2.5 DI MD22 133HP 98KW VN3 VB420058 14411VK500. 4pcs Connecting Rods for Toyota Starlet GT 1.3 Turbo 4E-FE/4EFTE Conrods 118mm. Turbo Cartridge for Toyota 2KD-FTV Hilux Hiace Innova Diesel 2.5L d4d brand new. Turbo + manifold for Audi A3 Seat Toledo VW Caddy Jetta 1.9 TDI BJB BKC BXE 77KW. Every message will be replied within 12 hours on 7×24 hours. 7×24 hours, always here for you. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “racingrepalcementparts” and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: JBIW13
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• EAN: 6941324413418