Anti surge Turbocharger T3 GT30 GT3037 GT3076 Turbo Oil Drain inlet outlet Lines. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. Turbocharger for Vauxhall Vivaro Movano RENAULT TRAFIC 1.9L GT1549S 703245 Turbo. K04 Turbo Charger for Skoda Octavia Superb VW Bora Golf 1.8 T AUQ 1.8T 2002. Melett Turbo Chra Turbocharger For Bmw 530 D E39 Oe Quality 3.0l 11652248907. Turbo Chra Cartridge Gt2052v 752610 For Land-Rover Defender 2.4DCI 140HP. Turbo Cartridge for Isuzu Trooper Bighorn Vauxhall Monterey MK2 3.0L DIESEL. Turbocharger for Dodge Stealth Mitsu 3000GT 6G72 3.0L TD04 1992- Left Side. GT2052V VNT TURBO for Audi A4 B5 2.5L 150HP 110Kw Turbocharger turbine. Turbo Turbolader for Audi RS6 C5 Plus 4.2L 4B S4 RS4 B5 V6 V8 2003 2003 2004. 57 Turbine Universal 400+HP TURBO CHARGER OIL FEED DRAIN LINE KIT. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I pick it up at the warehouse? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts. Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc. MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel. This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return.

Anti surge Turbocharger T3 GT30 GT3037 GT3076 Turbo Oil Drain inlet outlet Lines. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Other items you might also like. GT1749V Turbocharger Turbolader for FORD Ranger T6 PX PXII 2.2L w/ electronics. Turbocharger cartridge for AUDI A3 A4 TT VW GOLF SEAT 1.8T 180BHP K03 KO3 052. Turbo 8971852412 for Opel Corsa-C 1.7 DI 65HP 2000 2001 2002 2003 turbocharger. Turbo for Hyundai 2.0LTrajet Elantra Santa Fe Tucson 83kw 2000 2001 turbocharger. GT1748V Turbocharger for BMW 320d e46 Touring x3 2.0d 110kW 150PS 750431. Turbo Chra for Ford TRANSIT IV MK4 2.5TD FT190 4EA/4EB/4EC 984F6K682AG Cartridge. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? Can I pick it up at the warehouse? Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes. MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car’s connecting rod, crankshaft, piston, suspension and air spring. Meanwhile, as Australian EMTRON’s general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market. Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts. Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc. MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel. This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “maxpeedingrodsgb” and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: UTYZSI
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• EAN: 6941324414675