We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. RHF4H Turbo Cartridge VA420014 for Isuzu Trooper Isuzu MU 2.8L 4JB1-T I4 VIBR. Turbocharger CHRA for SMART City Coupe 55hp 45hp 33kw 40kw 4541970003 7088370001. GT2052V turbo for Nissan 3.0L ZD30ETi Patrol Terrano ZD30DDTI Safari 160hp. Turbo for Nissan Qashqai Renault Clio Megane Modus Scenic 1.5 DCI 54399880070. Turbo Turbocharger for Audi A4 2.0T B7 BUL BWE BWT K03 2005 2007 2008 2009. Billet Turbocharger for Ford FOCUS 1.6 TDCi DV6 110PS 110bhp 109HP 80kw GT1544V. Coilovers Shock Struts Kits for Mitsubishi GTO Z16A TWIN TURBO Dodge Stealth. Turbo Charger for Nissan Navara D40 Pathfinder 2.5L 751243 GT2056V YD25DDTi.

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. T04E Universal Turbo t3 flange pipe bov adaptor wastegate turbocharger kit 500HP. Turbo Cartridge Chra KP35 54359700005 For Fiat Lancia Opel Isuzu 1.3 CDTI. Turbocharger Turbo for Audi TT A3 1.8T 06A145713D 2000 -2004 K03-052 AUQ ARZ. Turbocharger 724930 for Audi A3 VW Seat Skoda 140 BHP 103 kW 2.0 TDI w/ gasket. Turbocharger for Ford Transit VI 2.4 TDCI 2006- 2014 75 KW 100HP 49S31-05403. Turbocharger for Isuzu Trooper 2.8L TD 4JB1T 74kW VIBR Turbocharger 1987 – 1989. Turbo for Nissan Navara 2.5L 133bhp 98kw 14411VK500 VA420115 VN3 turbocharger. Turbo For Skoda Octavia 136BHP 100KW 1Z5 Estate 04-10 turbocharger w/ manifold. 63 A/R 44 TRIM TURBO 400+HP BOOST STAGE III +Oil Line+Manifold new.

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Cartridge For Hyundai Montana 2.5 Crdi 2008 – 125kw/170hp 53039880122. Turbocharger For Chevrolet Turbo W3500 W4500 W5500 4.8l Isuzu Truck NPR Diesel. Turbo chra fit Ford Fiesta Fusion 1.4 TDCI 68HP DV4TD KP35 cartridge 54359700009. Turbocharger For Renault Dacia Logan 2007 K9K 1.5 dCi 68HP turbine with gaskets. Coilovers Shock Absorber Struts Kit For VW Transporter MK5 T5 T6 T28 T30.

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet Flange: 4-Bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.82 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76mm Compressor A/R: 0.6. Oil Inlet: M121.25 & 2M81.25 Oil Outlet: 2M81.25 Water: M181.5 Wastegate: w/o Wastegate Thrust bearing: 270 Degrees Turbo Type: Individual Bearing: Journal Bearing Cooling Type: Water + Oil. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo For Skoda Octavia 136BHP 100KW 1Z5 Estate 04-10 turbocharger w/ manifold. Turbocharger Core GT1749VA Cartridge 717858 for Audi A4 2.0 TDI (B7) BRE/BRF. Turbocharger Turbo for Audi TT A3 1.8T 06A145713D 2000 -2004 K03-052 AUQ ARZ. Turbo Charger Fit for Renault Kangoo Scenic Dacia Duster 1.5 dCi 110 BHP, 81 kW. GT2052V Turbo Cartidge for AUDI A4 2.5 TDI (B5) A6 2.5 TDI (C5) A8 2.5 TDI (D2). T3 T04E Universal Turbocharger 400HP Kit +Wastegate+Intercooler+Piping Oil Line. CT16V Turbo Turbolader For Toyota Hi-lux Land Cruiser 3.0l 171HP 1kd-ftv 2005. Turbocharger for Audi A6 Allroad A4 S4 2.7T QUATTRO 2.7 L K04 026 turbo. K04 K0422-582 Turbo Billet Wheel for Mazda CX7 CX-7 2.3L 53047109907 L33L13700C. K03 Upgraded Turbo Charger for Audi A4 A6 VW Passat 1.8T 058145703L. Turbocharger for Mitsubishi Pajero Shogun L200 Delica 2.8L Express L300 1998-00. Turbocharger For Chevrolet Turbo W3500 W4500 W5500 4.8l Isuzu Truck NPR Diesel. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: BFWP3O
• Manufacturer Warranty: 2 Years
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30, GT3037, GT3076, Turbo Turbocharger Fuel Oil line Kit, TURBO KIT
• Thrust bearing: 270 Degrees
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Type: Turbocharger
• Universal Fitment: Yes
• Feature: ESCP
• EAN: 6941324413395

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger Cartridge for Audi A3 TDI 140HP 103KW 2.0TDI (8P / PA) BMP / BMM. Turbo Turbolader FOR VW Crafter 2,5TDi BJL BJM 100kW 120KW 136PS 163PS. Set for Mazda 3 6 CX-7 2.3 L MPS MZR L3M713700D K0422 882 Turbocharger new. TURBOCHARGER FOR FORD RANGER MK7 MK8 2.2 RWD 2011 2012 Turbine. GT2052V Turbo Cartidge for AUDI A4 2.5 TDI (B5) A6 2.5 TDI (C5) A8 2.5 TDI (D2). 5 TURBO TURBOCHARGER COMPRESSOR 300+HP. Turbocharger for Renault Clio Megane MK2 1.5L dci 82HP 54359880000 Turbo. Ignition Coil Spark Plug Wire Set Fit for Polaris Ranger RZR800 2011-17 4013078. Turbolader Chra Cartridge for Dacia Logan Renault Clio Kangoo II 1.5dCi KP35 k9k. Turbo Cartridge for BMW 120D 520D E61 X1 X3 130KW 177HP 4913505875 7810199. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: 9S6LVN
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• Feature: ESCP
• EAN: 6941324413395

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbo Turbocharger Cartridge for BMW 1 Series E81 E82 E87 E88 4913505650. Turbocharger fit Fiat Lancia Vauxhall 1.3CDTI 54359880005 54359700005 Turbo apuk. Turbo chra fit Ford Fiesta Fusion 1.4 TDCI 68HP DV4TD KP35 cartridge 54359700009. Turbo chra core for Toyota HIACE LANDCRUISER 2KD-FTV 2.5 turbine 1720130120. K03 TURBO CARTRIDGE FOR AUDI A4 2.0 TFSI B7 BWE BUL 2005 – 2008 06D145701H. Induction Ignition Coil For Chevrolet sonic Hatchback(T300) 1.6 55561655. T3 T4 T3T4 TO4E V-band Turbo 0.63 AR Oil Drain Return FEED Line Kit 4 / 6 CYL. Turbocharger for Renault Clio Megane MK2 1.5L dci 82HP 54359880000 Turbo. NEW 53039880150 Turbocharger for VW Golf Polo Scirocco Tiguan Touran 1.4 TSI. Turbocharger for Mitsubishi Pajero Shogun L200 Delica 2.8L Express L300 1998-00. K04 K0422-582 Turbo Billet Wheel for Mazda CX7 CX-7 2.3L 53047109907 L33L13700C. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: MHPSN1
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• EAN: 6941324413395

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger Chra Core for Nissan Almera Tino SE DCI 2.2Di 134HP YD22DDTI 2003. Turbo Cartridge GT1549S for Renault Primastar Scenic Trafic 1.9 dCi 703245-1. New 767720 76970 For NISSAN D40 Navara Pathfinder YD25 2.5L Turbo Cartridge. Turbo Charger For Volvo S40 V40 1.9dci 4192t4 For Vauxhall Movano 2001. Turbocharger for AUDI A4 A6 VW PASSAT 2.0TDI GT1749V Turbo 140HP 103kw. Turbine for Mazda 3 6 CX-7 2.3L MPS MZR DISI 53047109901 K0422 882 Turbocharger. Turbocharger for Isuzu Trooper Opel 4J2TC 4JB1TC 4JG2TC VI95 RHB5 VE180027 3.1L. Turbocharger Chra Core for KIA CEED RIO D4FA, D4FB, EURO 3 KBA 116HP 88HP 782403. GT1749V Turbo Charger for VW Volksvagen Passat 2.0L 2.0TDI 136HP 100KW BPW 2005. Turbo Charger for Renault Laguna Espace Velsatis Avantime 2.2L 150 HP 718089. Turbocharger for Citroen Peugeot Ford Fiesta 1.4 HDi 02-2009 KP35 Turbo Charger. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: 6X15Y2
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK Postal codes with BT letters and Canary of Spain, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• EAN: 6941324413395

We know our products. Always the correct part. Turbo Charger GT30 GT3037 GT3076. 82 + Oil Drain Return Oil FEED Line Kits. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037. Application: Perfect for all 4 / 6 cyl 2.5L-3.0L engine Horse Power: Boost Horse Power up to 500BHP. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius (4) Cast aluminium blades with good gas tightness and corrosion resistance 3. This Turbocharger you will receive has been balanced using the VSR machine technology. Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely. We highly recommend you make sure the points below before installing: 1. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. This is universal application turbo, so modification might be required for some vehicles Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Turbocharger for BMW 730d / 530d M57D30 3.0D 135KW 142KW 184hp 193HP 454191. TD04L-14T Turbo cartridge CHRA for VOLVO S60 S80 V70 XC70 XC90 B5254T2 36012378. Turbocharger Chra Cartridge Fit For BMW 320D E46 X3 2.0 E83N 2.0L GT1749V 750431. K03 TURBO fit Peugeot 3008 308 5008 1.6L THP 155 150 EP6CDT 156HP Turbocharger. Turbocharger For Renault / Nissan 1.6 130hp 96kw 54389700000 / 1 / 7 / 17 Turbo. Turbolader TURBO 721164 801891 for TOYOTA AURIS AVENSIS PICNIC PREVIA RAV4. GT30 GT3037 GT3076 4 bolts Flange A/R 0.6 0.82 Water Cool Turbocharger 500HP. 5 TURBO TURBOCHARGER COMPRESSOR 300+HP. T76 Turbo Charger Turbolader T4. 96 A/ For 3.0L- 6.0L Engine V6 V8 Cars. Turbocharger fit LAND Rover Defender Discovery 2,5 TD5 90kw 102Kw 731320-1. T3 T4 T04E turbocharger 0.63 A/R 5 bolts universal turbo 400hp+ for 1.5L -2.5L. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “autopartsno.8″ and is located in this country: GB. This item can be shipped worldwide.

• shipping time to UK notice: 2-4 b.d. from UK
• Bearing: Wet Float (Journal bearing)
• Brand: BFO
• Classic Part: Yes
• Compressor A/R: 0.6 A,R
• Cooling Type: Water + Oil cooled
• Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
• Exhaust Outlet Flange: Standard 4-Bolt
• Features: Individual
• Fit for: Perfect for all 4 / 6 cyl 2.5L-3.0L engine
• Horse Power: Capable of Boosting Horse Power up to 500BHP
• Important Notice: Package Included: Just like the picture, Professional installation required
• Items Included: Hoses, T-Bolts
• Manufacturer Part Number: IYOFE8
• Manufacturer Warranty: 2 Years
• Note: No Instruction Included
• Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, The purchase needs to clear the customs duty, It’s aftermarket replcement part
• OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
• Oil lines: Oil Drain Return + Oil FEED Line Kit
• OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
• Reference OE/OEM Number: GT30 GT3037 GT3076 Turbo Turbocharger Fuel Oil line Kit
• Turbine Housing: 0.82 A,R
• Turbo: GT30 GT3037 GT3076 Turbo Turbocharger
• Turbo Wastegate: External Wastegate
• Type: Turbocharger
• Universal Fitment: Yes
• Warranty: 2 Year
• EAN: 6941324413395