NEW-EBC-259mm-REAR-TURBO-GROOVE-GD-DISCS-AND-YELLOWSTUFF-PADS-KIT-PD13KR302-01-ifpw

NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302

NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302

NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
Please check compatibility in the description section. Please read the listing carefully as variants can be common. NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302. Part Number : RR: GD1490(DP41931R). Item In Stock. EBC Brakes GD Rotors are made from high quality grey iron to exacting standards and undergo extensive testing and rigorous quality control and are then precision machined to your chosen slot or dimple pattern. The Discs come coated in either the colour Gold or Black, but this will come off with pad use to reveal the original iron cast underneath. The dimple drilled rotor was invented by EBC back in the 90s and has been imitated by many because of its ability to offer pad degassing without Through Drilling disc or rotor holes which has been shown to promote rotor cracks. The wide aperture slots on the EBC units actually draw cool air under the brake pad and rotor interface and help cool the temperatures of the pad contact which can shoot up to well over 1000 degrees at the very heart of the brake pad during heavy braking and can cause brake fade or loss of brake effect. These Full sweep slots on the EBC Sport Brake rotor also help remove dirt dust debris and water from the braking area but without doubt the main benefit of such sport rotors is their ability to maintain a flat and parallel pad surface throughout the lifetime of the brake pad set. EBC manufacture 90% of its rotor range in ISO and TUV approved facilities in the UK or in Italy, all rotors including GD Sport Rotors are machined and finished in the UK and in the USA. Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensure the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check. YELLOWSTUFF: Ultra High Friction Pads for Race, Trackday and Street Use. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff. When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted. It is also the choice of 90% of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 3500 lbs or 1600 kilos weight or 200 BHP. In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers. There is no guesswork here. Because of its huge heat range , the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower sedans to Trackday and Race use on most street based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. Picture A – Generic Image Picture B – Brake Pads Diagram Picture C – Brake Discs Technical Drawing. Rear Solid or Vented. Rear Number of Bolt Holes. Rear Total Height [mm]. Rear Tickness New/Min [mm]. GD Discs + Yellowstuff Pads. Rear Discs (2x) + Pads (4x). Discs And Pads Kit. Rear Discs Part Number. Rear Pads Part Number. This listing has been made as accurate as possible using the latest information provided by supplier. There may be on occasions more than one compatible part for your vehicle. We will do our best to answer as fast as possible. Be aware that your Model of Vehicle may have a choice of 2 / 3 different Discs And Pads Kit Options. Such variations can apply due to upgrade designs on later chassis numbers, or the manufacturers using different OEM suppliers during production process. We will do our best to assist and narrow down the variations. In some cases you may have to physically check your current fitted Discs And Pads Kit to the picture diagram and part number provided. Please see the item detail page for confirmation. This also applies to all orders going to the Scottish Highlands, Northern Ireland, or other offshore UK islands. For European deliveries will go with DHL, UPS or DPD Express service. Anything outside of Europe will go by Air Express. Our post is collected every weekday (Monday-Friday excluding Bank Holidays and exceptional circumstances). Please note that if you have not received your order in the expected time frame, we have to contact courier company before a lost in post claim form can be put through however this is a very rare occurrence and something we do not see happen often. The item “NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302″ is in sale since Saturday, July 15, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Brakes & Brake Parts\Brake Component Packages”. The seller is “oracle-motorstore” and is located in Huddersfield. This item can be shipped worldwide.
  • Manufacturer Part Number: GD1490-DP41931R
  • Brand: EBC
  • Placement on Vehicle: Rear
  • Reference OE/OEM Number: Right hand Left hand nearside N/S rotors two back

NEW EBC 259mm REAR TURBO GROOVE GD DISCS AND YELLOWSTUFF PADS KIT PD13KR302
1984-BMW-E30-325-i6-M20-2-5L-2-7L-T3-8PC-TURBOCHARGER-TURBO-KIT-MANIFOLD-FMIC-K-01-eso

1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K

1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K

1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K
The most complete turbo package available for the price. This package has all new quality parts that are capable of producing well beyond 450 horsepower at 30+ PSI with supporting modifications and a built motor. This is the most complete package available compared to others at an affordable price. On a stock motor the kit will create give the motor a 100-150 horsepower gain on a low boost setting of 8 PSI. This manifold will fit all BMW E30 Models with 2.5L/2.7L l6 Engines ONLY Excl. 100% Brand New Never Used or installed. Standard V-band T3 Downpipe Flange. V-Band Standard Hot Side. Comes with 8psi Internal wastegate. Oil Inlet – 1/8 NPT Oil Inlet. Bearing Type – Journal Bearing. Cooling Type: Oil Cooled. T04B/T4 Type Compressor Housing. 8 Blade Type T4 Compressor Wheel. T3 Type 4 Bolt Turbine flange. 5 bolt Exhaust flange. 2.48″ Minor and 2.89″ Major Propellar. 12 Blade Type Turbine. 3-2-1 Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder. Standard T3, T04e, T3/T4, GT30, GT35 Turbochargers Flange Configuration Outlet. Increase Engine Exhaust Output and Efficiency. CNC Machined T-304 Mandrel Bent Stainless Steel Piping And TIG Welded Steel Flanges. Made By OEM Approved & ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements. 6061 Light Weight Billet Aluminum Construction. Tube & Fin Light Weight Design. Construction: Machine Cut and Stamped Hand Welded. Hot Air Temperature: 32°F302°F (0°C150°C). Compress Air Flow Rate. Overall Size – 27″ x 7″ x 2.5. Core Size – 21″ x 6.5″ x 2.5. In/Outlet – 2.5″ OD / 2.25″ ID. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping. 2.5 Piping Diameter. 2.0mm Pipe Thickness. Increase 65% Air Flow comparing with other Standard Piping. Durable Stainless Steel Construction for light Weight and Durability. For High Temperature and High Boost Application. Will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit. Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine Movements. 3-Ply Nylon for Strong Reinforcement. Working pressure 80 PSI. Burst pressure 245 PSI. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable. Improves Up to 95% Filtration Efficiency. Designed to increase horsepower and acceleration. Width: 6″ Inlet: 3.0″ Overall Tall: 3.5″ Mesh Tall: 2.5″. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs. High Performance Manual Boost Control From 030 psi Capacity. CNC Machined Light Weight and Resistant to Rust. Hose clamp and all necessary hardware for complete installation. Aggressive JDM racing discharge sound. 8 Discharge ports that draw in surrounding air and release a unique discharge sound. 40mm hard-anodized valve for increased airflow. Dual spring system promoted response and allows for high boost pressures. Support up to 30 PSI boost pressure. OIL DRAIN & FEED LINE. OIL DRAIN FEED LINE. Inner Diameter: 0.50. CNC Machined Turbo Adapter Plate. Weldable 10AN Oil Pan Fitting Included. Inner Diameter: 0.25. 1/8 NPT Fittings Natural Polish Finish. Brass Fitting Block Fitting and Port Cover Included. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. Color may randomly selected depend on hand or inventory. Modification might required for complete installation. Professional TURBO INSTALLER is Highly recommend. E-checks are automatically held until the established clearing date, to reduce any delays please provide a valid telephone number upon the checkout. If you’re located outside of the continental USA. If this process is not completed, delays and other issues will occur. In order for us. Please inspect your order upon receipt. Because we always test fit our products, it is rare that our item will have fitment issue. If in case the item you receive does not fit your car, we need to ask you for digital picture so that we can assist you. Most aftermarket items do not come with instructions and professional installation for all item is highly recommended. No exchanges will be issued on products that have been damaged or used improperly (Modified). We will work with you and solve the problem. We ALWAYS recommend professional installation. All emails are to be answered within 24 hours except Sat and Sun. What happens if the item is out of stock? We try our best to have all items we list and since all items are constantly listed. Occasionally, due to high demand or human error we may be temporarily out of stock. This matter is urgent! Except major US holidays. All emails will be replied in the order it was received. We usually reply within 24 hours, In some cases emails are lost in the spam or junk folder so please check them regularly. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K” is in sale since Wednesday, May 27, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “us.wan10″ and is located in Walnut, California. This item can be shipped worldwide.
  • Brand: US.WAN CO.
  • Manufacturer Part Number: TBK-BM403-SS-BKCH
  • Interchange Part Number: T3/T4 T04e AR .63 Turbo
  • Other Part Number: T3 4 Bolt Turbo Flange
  • Surface Finish: Chrome / BLACK
  • Placement on Vehicle: Front
  • Manufacturer: WAN Co.

1984+ BMW E30 325 i6 M20 2.5L/2.7L T3 8PC TURBOCHARGER TURBO KIT MANIFOLD FMIC K