BMW-E36-E39-E38-Z3-Sports-Clutch-Flywheel-Clutch-Turbo-Kit-01-wyqf

BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit

BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit

BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit
BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit. The description of this item has been automatically translated. Up to 480PS & 580NM. Sport clutch for BMW E36 E39 E38 Z3. 323i & 328i & Z3. See vehicle list above. A brand new reinforced sports clutch with light weight is offered r Single mass flywheel. It is a complete set with reinforced pressure plate, sprung Copper-ceramic 6-pad friction disc, flywheel light version and reinforced release bearing. Good for Le meetings to 48 0PS / 58 0NM Very good start-up behavior in Stop & Go B compared to other sports clutches without torsion springs. H high coefficient of friction = High power transmission. Easy replacement of the serial printing plate. Higher transferable torque than organic friction lining. Higher thermal resilience compared to organic friction lining. The torsion damper has a higher stroke torque: maximum load capacity of the torsion damper before the block stop. Very resistant to dirt. Original contact pressure is approx. This reinforced version has 10,000N. Coupling 240mm and 10 teeth. Up to 480PS & 580NM Sport clutch for BMW E36 E39 E38 Z3 323i & 328i & Z3 528i & 525tds 728i & 725tds see vehicle list above A brand new reinforced sports clutch with light weight is offeredr Single mass flywheel. Good for Lemeetings to 480PS /580NM Very good start-up behavior in Stop & Go Bcompared to other sports clutches without torsion springs. 6,000N This reinforced v. The item “BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit” is in sale since Saturday, April 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “team-2-fast” and is located in Kirchheim. This item can be shipped worldwide.
  • Manufacturer/Provider: Team2Fast
  • Package: No
  • Modified Article: No
  • Manufacturer Part Number: 001111
  • Type: Clutch
  • Manufacturer: Team2Fast GmbH
  • Brand: Unbranded

BMW E36 E39 E38 Z3 Sports Clutch + Flywheel Clutch Turbo Kit
91-99-BMW-E36-M3-325-323-T3-T4-TURBOCHARGER-TURBO-KIT-Blue-MANIFOLD-BOV-WG-GAUGE-01-lbhu

91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE

91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE

91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE
The most complete turbo package available for the price. This package has all new quality parts that are capable of producing well beyond 450 horsepower at 30+ PSI with supporting modifications and a built motor. This is the most complete package available compared to others at an affordable price. On a stock motor the kit will create give the motor a 100-150 horsepower gain on a low boost setting of 8 PSI. For 2.5L, 2.8L, 3.0L M3(E36) & 3.2L S52 (except E46 M3 3.2L). 100% Brand New Never Used or installed. Standard 5 bolt T3 Downpipe Flange. 5 Bolt Standard Hot Side. Oil Inlet – 1/8 NPT Oil Inlet. Bearing Type – Journal Bearing. Cooling Type: Oil Cooled. T04B/T4 Type Compressor Housing. 8 Blade Type T4 Compressor Wheel. T3 Type 4 Bolt Turbine flange. 5 bolt Exhaust flange. 2.48″ Minor and 2.89″ Major Propellar. 12 Blade Type Turbine. Standard T3/ T4 (T03/ T04) Turbo Flange Configuration Outlet. Included Wastegate Flange for 35mm/38mm external WG. Increase Engine Intercooler Output and Efficiency. Made of High Quality Cast Iron Material for Strength and Durability. Made by High Strength T-304 Stainless Steel Construction. Increases High Flow Air Rate and Maximizes Performance. TIG Welded CNC Machined Flange and Mandrel-Bent Piping. Made of High Quality T304 Polished Stainless Steel Material. T3 5 Bolt Flange. Measures up to 35 psi in pressure. Digital display with Blue and Red LED. Smoke tint lens during the day. Clear and bright LED Display during the night. High accuracy and easy operation. 6061 Light Weight Billet Aluminum Construction. Tube & Fin Light Weight Design. Construction: Machine Cut and Stamped Hand Welded. Hot Air Temperature: 32°F302°F (0°C150°C). Compress Air Flow Rate. Overall Size – 27″ x 7″ x 2.5. Core Size – 21″ x 6.5″ x 2.5. In/Outlet – 2.5″ OD / 2.25″ ID. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping. 2.5 Piping Diameter. 2.0mm Pipe Thickness. High Strength Silicon Coupler Hoses (3 Layers of Silicone). Durable Stainless Steel T-Bolt Clamp Included. Increase 65% Air Flow comparing with other Standard Piping. Stianless Steel Construction for light Weight and Durability. For High Temperature and High Boost Application. Will not strip like the cheap kind. Strong & tighter fitting use hair spray between the pipe and coupler. Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit. Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine Movements. 3-Ply Nylon for Strong Reinforcement. Working pressure 80 PSI. Burst pressure 245 PSI. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable. Improves Up to 95% Filtration Efficiency. Designed to increase horsepower and acceleration. Width: 6″ Inlet: 3.0″ Overall Tall: 3.5″ Mesh Tall: 2.5″. High strength Alloy aluminum body with steel head. Comes with 6 + 14 psi spring installed. Protect the turbo system from over boosting. Complete install kit included. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs. High Performance Manual Boost Control From 030 psi Capacity. CNC Machined Light Weight and Resistant to Rust. Hose clamp and all necessary hardware for complete installation. Aggressive JDM racing discharge sound. 8 Discharge ports that draw in surrounding air and release a unique discharge sound. 40mm hard-anodized valve for increased airflow. Dual spring system promoted response and allows for high boost pressures. Support up to 30 PSI boost pressure. Direct bolts Designed on the stock Honda or the aftermarket high volume fuel rail. 9/16- 9/18 threads, the fuel outlet port allows various different hoses ranging from stock Honda fuel return hose to -8 AN hose. Vacuum reference is at 1 : 1 Ratio. CNC Machined Billet Aluminum Alloy Material. OIL DRAIN & FEED LINE. OIL DRAIN FEED LINE. Inner Diameter: 0.50. CNC Machined Turbo Adapter Plate. Weldable 10AN Oil Pan Fitting Included. Inner Diameter: 0.25. 1/8 NPT Fittings Natural Polish Finish. Brass Fitting Block Fitting and Port Cover Included. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. Color may randomly selected depend on hand or inventory. Modification might required for complete installation. Professional TURBO INSTALLER is Highly recommend. E-checks are automatically held until the established clearing date, to reduce any delays please provide a valid telephone number upon the checkout. If you’re located outside of the continental USA. If this process is not completed, delays and other issues will occur. In order for us. Please inspect your order upon receipt. Because we always test fit our products, it is rare that our item will have fitment issue. If in case the item you receive does not fit your car, we need to ask you for digital picture so that we can assist you. Most aftermarket items do not come with instructions and professional installation for all item is highly recommended. No exchanges will be issued on products that have been damaged or used improperly (Modified). We will work with you and solve the problem. We ALWAYS recommend professional installation. All emails are to be answered within 24 hours except Sat and Sun. What happens if the item is out of stock? We try our best to have all items we list and since all items are constantly listed. Occasionally, due to high demand or human error we may be temporarily out of stock. This matter is urgent! Except major US holidays. All emails will be replied in the order it was received. We usually reply within 24 hours, In some cases emails are lost in the spam or junk folder so please check them regularly. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE” is in sale since Wednesday, May 27, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “us.wan10″ and is located in Walnut, California. This item can be shipped worldwide.
  • Brand: US.WAN CO.
  • Manufacturer Part Number: TBKTMFE36E46252
  • Interchange Part Number: E36 320 323 325 328 M3 E46 330 Z3 Z4
  • Other Part Number: BMW 2.5L, 2.8L, 3.0L, 3.2L I6
  • Surface Finish: blue Steel Aluminum Cast Silicone Alloy
  • Placement on vehicle: Front
  • Manufacturer: tbk-TMFE36E46-2522

91-99 BMW E36 M3 325 323 T3/T4 TURBOCHARGER TURBO KIT Blue+MANIFOLD+BOV+WG+GAUGE